Horizon UserManualV6 - 第194页

Drive System to Print Height Selecting this diagnostic function drives the ProFlow transfer head down to printing pressure (as setup in the Edit Data board file). There is no pressure applied to the paste cassette at thi…

100%1 / 378
PROFLOW Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Run
Diagnost
Adjust Next Previous Exit
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
NOTE
Paste Pressure is only available while a software controlled pressure regulator
is fitted.
The menu bar changes to the following:
Next Previous Incr. Decr. Exit
Next / Previous keys move the highlight bar up and down the list of diagnostic
parameters.
Incr. / Decr. keys change the value of the selected diagnostic parameter.
Exit returns operation to the ProFlow diagnostics page.
Home ProFlow Selecting this diagnostic function drives the ProFlow unit up to the home
position. If the downstop is in the way a warning is displayed.
Drive System to
Contact Height
Selecting this diagnostic function drives the ProFlow unit onto the screen, (a
slight pressure seal, is made between the ProFlow transfer head and the screen).
There is no pressure applied to the paste cassette.
Software Version 6 User Manual 5.11
DIAGNOSTICS
PROFLOW
ProF
l
ow D
i
agnost
i
cs
11.42Kg
Home ProFlow
Drive System to Contact Height
Drive System to Print Height
Drive System Using Jog Buttons
Toggle Paste Pressure
Pressure Reading
ProFlow Fitted
Paste Cassette Low
ProFlow Pressure Regulator Fitted
ON
ON
OFF
OFF
ProFlow Adjust Parameters
PFLOW CONTACT POS.
IDLE PRESSUE
0.0
0.2
mm
bar
Drive System to
Print Height
Selecting this diagnostic function drives the ProFlow transfer head down to
printing pressure (as setup in the Edit Data board file). There is no pressure
applied to the paste cassette at this time.
Drive System
Using Jog Buttons
Selecting this diagnostic function enables the ProFlow unit to be moved up or
down by means of the jog buttons.
Toggle Paste
Pressure
Selecting this diagnostic function initiates pressure onto the paste cassette.
Before initiating pressure to the paste cassette, the transfer head must be in
contact with, and have an adequate seal with the screen. A warning is displayed
if toggle paste pressure is selected with the transfer head off the screen.
Pressure Reading This diagnostic function continuously displays the current pressure in kg,
exerted from the squeegee pressure load cell onto the ProFlow unit.
ProFlow Fitted Indication of electrical connection of ProFlow to the machine software.
Paste Cassette Low ProFlow paste low sensor activated (on), indicating paste low or empty or,
deactivated (off).
ProFlow Pressure
Regulator Fitted
Switched to OFF indicates that the ProFlow unit is fitted with a mechanical
pressure regulator control. Switched to ON indicates that the software
addressable regulator control is activated, (ProFlow unit not fitted with
mechanical pressure regulator).
5.12 User Manual Software Version 6
DIAGNOSTICS
PROFLOW
SQUEEGEE Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Run
Diagnost
Next Previous Exit
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Home Front
Squeegee
Selecting this diagnostic function drives the front squeegee upwards to its home
position, as detected by its home sensor.
Home Rear
Squeegee
Selecting this diagnostic function drives the rear squeegee upwards to its home
position, as detected by its home sensor.
Front Squeegee to
Dwell Height
Selecting this diagnostic function drives the front squeegee to a position clear of
the top of the screen (default is 24mm).
Rear Squeegee to
Dwell Height
Selecting this diagnostic function drives the rear squeegee to a position clear of
the top of the screen (default is 24mm).
Rear Squeegee to
Flood Height
Selecting this diagnostic function drives the rear squeegee to the height set by the
flood reference height parameter.
Drive Front
Squeegee Using
Jog Buttons
Selecting this diagnostic function enables the front squeegee to driven up and
down using the jog buttons. The right jog button drives the squeegee down and
the left jog button drives it up, stopping immediately the button is released. ‘Use
the Left Jog Button to move the Squeegee upwards, and the Right Jog
Button to move it downwards’ is displayed in the message prompt box.
Software Version 6 User Manual 5.13
DIAGNOSTICS
SQUEEGEE
Squeegee D
i
agnost
i
cs
Pressure Reading
22.356 kg
Home Front Squeegee
Home Rear Squeegee
Front Squeegee To Dwell Height
Rear Squeegee To Dwell Height
Rear Squeegee To Flood Height
Drive Front Squeegee Using Jog Buttons
Drive Rear Squeegee Using Jog Buttons