Horizon UserManualV6 - 第20页

9. Select Load (F1). Load Up Down Exit The message ‘Loading Language...’ is displayed. A delay of approximately 20 seconds take place and all displayed text is changed to the selected language. The message ‘Language Load…

100%1 / 378
3. Use Left, Right, Up or Down function keys (F4-F7) to highlight the
required file.
Load Rebuild
List
Left Right Up Down
Exit
4. Press Load (F1).
Load
Rebuild
List
Left Right Up Down Exit
5. Initialize the machine by pressing the System button.
The selected file is now displayed on the status page.
The operator can change the language used in the display menus.
To select a different language continue with Step 6. If the correct language is
loaded go to Step 12.
6. Select Setup (F6).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust
Setup
Monitor Maint.
7. Select Change Language (F7).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
8. A list of installed languages is displayed. Select Up (F5), or Down (F6) until
the desired language is highlighted.
Software Version 6 User Manual 1.3
MACHINE PROGRAMMING
STAGE 1
9. Select Load (F1).
Load
Up Down Exit
The message ‘Loading Language...’ is displayed. A delay of approximately 20
seconds take place and all displayed text is changed to the selected language.
The message ‘Language Loaded...’ is displayed.
10. Select Exit (F8).
Load Up Down
Exit
11. Select Exit (F8).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
12. Select Monitor (F7).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup
Monitor
Maint.
13. Select Log On (F1).
Log
On
Host
Comms
Clear
Batch
Batch
Limit
Perform
Display
Event
Display
System
Disable
Exit
The Operator Log On window is displayed:
Using the keyboard, enter the operator’s name/ID and press Enter on the
keyboard, the operator’s name/ID appear on the status page.
1.4 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 1
14. Select Exit (F8).
Log
Off
Host
Comms
Clear
Batch
Batch
Limit
Perform
Display
Event
Display
System
Disable
Exit
If this is the correct file for the product proceed to Stage 4. If the file has to be
edited proceed to Stage 3.
Software Version 6 User Manual 1.5
MACHINE PROGRAMMING
STAGE 1