Horizon UserManualV6 - 第264页
2Di SETUP Preparation For 2Di inspection functionality the machine requires 2D Inspection to be set to enabled. Set Preferences 1. Select Maint. Run Open Cover Paste Load Clean Screen Adjust Setup Monitor Maint. 2. Selec…
Adjustment During
Print Cycle
Most inspection parameters may be adjusted whilst a print cycle is in progress.
The parameters that may be adjusted are:
•
Global Limits
•
Limit Sets
•
Site Parameters
NOTE
The site coordinate parameters are not available whilst a print cycle is in
progress.
To access the parameter adjustment menu during a print cycle select Adjust
Inspect.
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust Knead
Paste
Adjust
Inspect
The following window is displayed:
Edit
Global
Edit
Limits
New Pre-
images
Next
Site
Previous
Site
Edit
Site
Exit
The New Pre-images button is only available if Pre-image is set to 1.
NOTE
If an error occurs when adjusting inspection parameters during a print cycle,
the adjustment page closes.
Any changes made are saved.
Software Version 6 User Manual 8.13
2Di INSPECTION
MODULE OVERVIEW
Site Name
Site Priority
StencilInspect Type
Board InspectType
SiteAlignment
Limit Set ID
Paste Scaling
Site X Coord
SiteYCoord
SiteWidth
Site Height
IC 27 - 1
General
Advanced
Advanced
X andY
Fine
1.00
39.4mm
71.2mm
3.00mm
4.00mm
2D Inspect Rate
StencilInspect Type
Board InspectType
Pre-image
Min. Sites/Cycle
Warning Limit
BlockageAction
Blockage Clean
SmearAction
Smear Clean
Low PasteAction
InspectAfter Clean
Post PrintAlignment
No. Sites
1
Advanced
Advanced
Every
10
3
Auto
Mode 2
Manual
Mode 1
Re-print
Enabled
Performed
30
Global Inspect Parameters
Site Parameters
2Di SETUP
Preparation For 2Di inspection functionality the machine requires 2D Inspection to be set to
enabled.
Set Preferences 1. Select Maint.
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor
Maint.
2. Select Set Prefs.
Calibrat
Pressure
Calibrat
Offset
Calibrat
Vision
House
Keeping
Set
Prefs
Diagnost Test
Cycles
Exit
3. Set 2D inspection to enabled using the Next and Incr. keys.
Next
Previous
Incr.
Decr. Exit
4. Ensure under screen cleaner function selected, ie Vacuum or Standard.
5. Select Exit. The message ‘Printer configuration data file saved’ is
displayed in the message prompt bar above the menu bar.
Next Previous Incr. Decr.
Exit
6. Select Exit.
Calibrat
Pressure
Calibrat
Offset
Calibrat
Vision
House
Keeping
Set
Prefs
Diagnost Test
Cycles
Exit
Load Product File 1. Select Setup.
Run Open
Cover
Paste
Load
Clean
Screen
Adjust
Setup
Monitor Maint.
2. Select Load Data. The message ‘Use keyboard to action product search’
is displayed in the message prompt bar above the menu bar.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
8.14 User Manual Software Version 6
2Di INSPECTION
2Di SETUP
3. Use the Left, Right, Up and Down keys to highlight a product file. If the
product to be setup is a new one, select an existing product file and modify it.
Load Rebuild
List
Left Right Up Down
Exit
4. Select Load. The machine loads the product file and trains the fiducials.
Load
Rebuild
List
Left Right Up Down Exit
Edit Data 1. If the loaded product file is the correct one, go to Step 8. If the file needs to
be modified continue with Step 2.
2. Select Edit Data.
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
The following window is displayed:
3. To change the product name; highlight product name using the Next and
Previous keys. Select Incr. type in required product name and press Enter
using the keyboard.
4. If the product name is changed the message ‘Do you also want to create a
copy of the inspection file ?’ is displayed. Select one of the following:
Yes Global
Only
No
Yes - All data is copied, including the site coordinates.
Global Only - The global parameters and limits are copied.
No - No inspection file is copied. Use when setting up an inspection file for the
first time.
Software Version 6 User Manual 8.15
2Di INSPECTION
2Di SETUP
Dek04
Dek04
30 mm
24 mm/s
NONE
EDGE
DISABLED
101.5 mm
152.5 mm
1.6 mm
150 mm/s
20 mm/s
0.0 mm
0.0 mm
PRODUCT NAME
PRODUCT ID
DWELL HEIGHT
DWELL SPEED
SCREEN ADAPTOR
SCREEN IMAGE
CUSTOM SCREEN
BOARD WIDTH
BOARD LENGTH
BOARD THICKNESS
PRINT SPEED
FLOOD SPEED
PRINT FRONT LIMIT
PRINT REAR LIMIT
Edit Current Process Parameters
..more