Horizon UserManualV6 - 第266页

5. Using the Next, Previous, Incr. and Decr. keys, edit the current process parameters for the new product. Save Next Previous Incr. Decr. Exit 6. Press Save . Save Next Previous Incr. Decr. Exit 7. When the message ‘Boa…

3. Use the Left, Right, Up and Down keys to highlight a product file. If the

product to be setup is a new one, select an existing product file and modify it.

Load Rebuild

List

Left Right Up Down

Exit

4. Select Load. The machine loads the product file and trains the fiducials.

Load

Rebuild

List

Left Right Up Down Exit

Edit Data 1. If the loaded product file is the correct one, go to Step 8. If the file needs to

be modified continue with Step 2.

2. Select Edit Data.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

The following window is displayed:

3. To change the product name; highlight product name using the Next and

Previous keys. Select Incr. type in required product name and press Enter

using the keyboard.

4. If the product name is changed the message ‘Do you also want to create a

copy of the inspection file ?’ is displayed. Select one of the following:

Yes Global

Only

Yes - All data is copied, including the site coordinates.

Global Only - The global parameters and limits are copied.

No - No inspection file is copied. Use when setting up an inspection file for the

first time.

Software Version 6 User Manual 8.15

2Di INSPECTION

2Di SETUP

Dek04

30 mm

24 mm/s

NONE

EDGE

DISABLED

101.5 mm

152.5 mm

1.6 mm

150 mm/s

20 mm/s

0.0 mm

PRODUCT NAME

PRODUCT ID

DWELL HEIGHT

DWELL SPEED

SCREEN ADAPTOR

SCREEN IMAGE

CUSTOM SCREEN

BOARD WIDTH

BOARD LENGTH

BOARD THICKNESS

PRINT SPEED

FLOOD SPEED

PRINT FRONT LIMIT

PRINT REAR LIMIT

Edit Current Process Parameters

..more

5. Using the Next, Previous, Incr. and Decr. keys, edit the current process

parameters for the new product.

Save

Next Previous Incr. Decr.

Exit

6. Press Save.

Save

Next Previous Incr. Decr. Exit

7. When the message ‘Board Data File Saved’ is displayed, press Exit.

Save Next Previous Incr. Decr.

Exit

8. Select Mode until Step appears in mode option of the printer status display.

Mode

Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

If the required screen is already in the printer go to Step 16.

If the screen needs to be changed continue with Step 9.

9. Select Change Screen.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

10. When the message ‘Open Front Cover and Remove Screen’ is displayed

lift the printhead cover.

11. Remove the screen from the printer.

12. Fit the new screen into the printer ensuring the correct orientation of the

screen.

13. Lower the printhead cover.

14. Press the System button on the control console.

15. Select Change Screen.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

16. Select Exit.

Mode Load

Data

Edit

Data

Setup

Squeegee

Change

Screen

Change

Tooling

Change

Language

Exit

8.16 User Manual Software Version 6

2Di INSPECTION

2Di SETUP

17. Select Run.

Run

Open

Cover

Paste

Load

Clean

Screen

Adjust Setup Monitor Maint.

18. If the screen has not been changed the message ‘Screen has not been

changed for this product’ is displayed, select Use Screen to continue.

19. Select Auto Board.

Auto

Board

Manual

Board

Knead

Paste

Exit

20. The message ‘Load board’ is displayed. Load board, select Confirm when

the board is loaded.

Confirm

Exit

21. Setup the board and screen fiducials.

22. Select Inspect Setup. If this option is unavailable, check set prefs for 2D

Inspection enabled.

Step Open

Cover

Inspect

Setup

Single Exit

NOTE

The windows in this procedure show the parameters and options available with

both screen and board inspect type set to advanced. If screen or board inspect

type is set to basic or none, certain parameters and options are not displayed.

CAUTION

FIDUCIAL POSITION. If during the print cycle, the position of board

fiducials are changed, the position of previous inspection sites (if any) may

be affected. Small changes are automatically compensated for, however

large changes, ie more than 3mm, require sites to be repositioned.

Software Version 6 User Manual 8.17

2Di INSPECTION

2Di SETUP

2D INSPECT RATE

STENCIL INSPECT TYPE

BOARD INSPECT TYPE

PRE-IMAGE

MIN SITES/CYCLE

WARNING LIMIT

BLOCKAGE ACTION

BLOCKAGE CLEAN

SMEAR ACTION

SMEAR CLEAN

LOW PASTE ACTION

INSPECT AFTER CLEAN

POST PRINT ALIGNMENT

No. SITES

ADVANCED

EVERY

MANUAL ACTION

MODE 1

MANUAL ACTION

MODE 2

RE-PRINT

ENABLED

PERFORMED

Global Inspect Parameters

SITE NAME

SITE PRIORITY

STENCIL INSPECT TYPE

BOARD INSPECT TYPE

SITE ALIGNMENT

LIMIT SITE I.D.

PASTE SCALING

SITE X COORD

SITE Y COORD

SITE WIDTH

SITE HEIGHT

QFP 1

GENERAL

ADVANCED

X AND Y

FINE

1.00

84.5 mm

89.5mm

4.00 mm

Site Parameters