Horizon UserManualV6 - 第31页
13. Press Exit (F8) Mode Load Data Edit Data Setup Squeegee Change Screen Change Tooling Change Language Exit Feedback Option 14. Press Calibrat Heights (F2). Change Squeegee Calibrat Heights Exit The message ‘Ensure cor…
5. Press Exit (F8).
Next Previous Incr. Decr.
Exit
6. Press Save (F3).
Adjust
Save
Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
Or:
7. Using Step Up and Step Down (F6 and F7) as necessary to raise or lower
the front squeegee until it just touches the front rail.
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
8. Press Rear Squeegee (F5).
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
9. Using Step Up and Step Down (F6 and F7) as necessary to raise or lower
the rear squeegee until it just touches the front rail.
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
10. Press Save (F3).
Adjust
Save
Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
11. Press Exit (F8).
Adjust Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
12. Press Exit (F8).
Change
Squeegee
Calibrat
Heights
Exit
1.14 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 4A
13. Press Exit (F8)
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Feedback Option 14. Press Calibrat Heights (F2).
Change
Squeegee
Calibrat
Heights
Exit
The message ‘Ensure correct squeegees are fitted!’ is displayed.
15. Press Continue (F1).
Continue
Restore
Defaults
Exit
The message ‘Calibrating Pressure Heights - DO NOT Open Covers!’ is
displayed.
16. Press Exit (F8).
Continue Restore
Defaults
Exit
17. Press Exit (F8).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Software Version 6 User Manual 1.15
MACHINE PROGRAMMING
STAGE 4A
STAGE 4B
ProFlow Setup If squeegees were used when running the last product, carry out the Squeegees to
ProFlow Replacement Procedure, see Technical Reference Manual, ProFlow
Module Chapter - Replacement Procedures.
For setting the contact position, carry out the ProFlow Contact Position Setup,
see Technical Reference Manual, ProFlow Module Chapter - Adjustments and
Settings.
1.16 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 4B