Horizon UserManualV6 - 第331页

10. Refit the paper spindles to both ends of the new paper roll. Ensure both faces of the new paper roll are flush. 11. Install the new clean paper roll at the front of the unit, ensure the paper is routed from underneat…

7. Fit the left hand shaft end into the cleaner left hand end plate.

8. Locate the right hand end of the paper roll shaft into the motor drive spindle

ensuring the shaft is correctly seated.

Rotate the paper roll shaft until the groove is at 45° to the horizontal, facing

towards the top rear printhead cover of the machine.

9.30 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

10. Refit the paper spindles to both ends of the new paper roll. Ensure both

faces of the new paper roll are flush.

11. Install the new clean paper roll at the front of the unit, ensure the paper is

routed from underneath the roll towards the rear of the unit.

12. Feed the cleaner paper across the body assembly, ensuring the cleaner paper

is aligned parallel to the unit end plate.

Software Version 6 User Manual 9.31

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER

13. Insert the paper roll rod into the right hand flange of the shaft. Lay the rod

along the shaft’s groove trapping the cleaner paper between the shaft and

rod.

14. Rotate the end flange of the rod towards the rear of the machine to lock the

rod onto the shaft.

15. Rotate the take up roll one complete revolution against the motor clutch to

tension the cleaner paper across the cleaner squeegee assembly.

9.32 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

BLUE UNDERSCREEN CLEANER