Horizon UserManualV6 - 第333页
16. Ensure the cleaner paper has been routed correctly, from underneath the paper roll (1) rearwards across the squeegee assembly and threaded between paper rod and shaft (2). NOTE Figures in brackets refer to the diagra…
13. Insert the paper roll rod into the right hand flange of the shaft. Lay the rod
along the shaft’s groove trapping the cleaner paper between the shaft and
rod.
14. Rotate the end flange of the rod towards the rear of the machine to lock the
rod onto the shaft.
15. Rotate the take up roll one complete revolution against the motor clutch to
tension the cleaner paper across the cleaner squeegee assembly.
9.32 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
BLUE UNDERSCREEN CLEANER
16. Ensure the cleaner paper has been routed correctly, from underneath the
paper roll (1) rearwards across the squeegee assembly and threaded between
paper rod and shaft (2).
NOTE
Figures in brackets refer to the diagram below.
17. Press Prime Paper (F5) key.
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
The message ‘Press the two control buttons to feed paper’ is displayed.
18. Using the two button control, prime the paper ensuring it feeds correctly.
Software Version 6 User Manual 9.33
CONSUMABLE REPLENISHMENTS
BLUE UNDERSCREEN CLEANER
1
2
19. Insert the screen into the printer, ensure correct orientation and print
justification.
20. Close the front printhead cover.
21. Press the System button.
26. Press Change Screen (F2).
Change
Screen
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
24. Press Exit (F8).
Change
Screen
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
9.34 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
BLUE UNDERSCREEN CLEANER