Horizon UserManualV6 - 第340页
7. If the set preference is set to warn, the following window is displayed: The tricoloured beacon shows amber/green. 8. Select Confirm (F1). Confirm 9. Select End Run (F1). End Run Stop Cycle Paste Load Clean Screen Adj…
2. Select Confirm (F1).
Confirm
3. Go to Step 17.
4. If the set preference is set to pause, the following window and menu bar is
displayed:
Cancel
If the set preference is set to suspend, the following window and menu bar is
displayed:
Cancel
In both cases the tricoloured beacon shows red.
5. Select Cancel (F8).
Cancel
6. Go to Step 17.
Replenishment During a Print Run:
If the set preference is set to warn, continue with Step 7. If the set preference is
set to pause go to Step 11. If the set preference is set to suspend go to Step 15.
Software Version 6 User Manual 9.39
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER
7. If the set preference is set to warn, the following window is displayed:
The tricoloured beacon shows amber/green.
8. Select Confirm (F1).
Confirm
9. Select End Run (F1).
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust Knead
Paste
10. Go to Step 17.
11. If the set preference is set to pause, the following window is displayed:
The tricoloured beacon shows red.
12. Select Defer (F8).
Defer
The print run continues.
13. Select End Run (F1).
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust Knead
Paste
14. Go to Step 17.
9.40 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER
15. If the set preference is set to suspend, the following window is displayed:
The tricoloured beacon shows red.
16. Select End Run (F8).
End
Run
17. Press Open Cover (F2).
Run
Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
18. If the Vortex cleaning cassette is to be replenished continue with Step 19. If
the solvent tank only is to be replenished go to Step 20.
19. Press Change Screen (F2).
Change
Screen
Board
Clamps
Prime
Paper
Prime
Solvent
Exit
20. Lift the front printhead cover.
21. If the Vortex cleaning is to be replenished continue with Step 22. If the
solvent tank only is to be replenished go to Solvent Replenishment section.
Software Version 6 User Manual 9.41
CONSUMABLE REPLENISHMENTS
VORTEX UNDERSCREEN CLEANER