Horizon UserManualV6 - 第350页

5. Fit the rear squeegee onto the rear squeegee mount tightening the thumbscrews until they are finger tight. 6. Fit the front squeegee onto the front squeegee mount again ensuring that the thumbscrews are only finger ti…

100%1 / 378
SQUEEGEES
Fitting the
Squeegees
From the Status page:
1. Press Setup (F6).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust
Setup
Monitor Maint.
2. Press Setup Squeegee (F4).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
3. Press Change Squeegee (F1).
Change
Squeegee
Calibrat
Heights
Exit
The message ‘Open cover and change squeegees’ is displayed.
4. Open the front printhead cover.
The front and rear squeegees must be fitted in the correct positions. Each
squeegee has a key-way machined into it to ensure that it cannot be incorrectly
fitted.
Software Version 6 User Manual 9.49
CONSUMABLE REPLENISHMENTS
SQUEEGEES
5. Fit the rear squeegee onto the rear squeegee mount tightening the
thumbscrews until they are finger tight.
6. Fit the front squeegee onto the front squeegee mount again ensuring that the
thumbscrews are only finger tight.
7. Close the front printhead cover.
8. Press the System button.
9. Press Continue (F1).
Continue
10. If fitted, remove stencil.
9.50 User Manual Software Version 6
CONSUMABLE REPLENISHMENTS
SQUEEGEES
Squeegee Pressure
Height
To complete this calibration, machines with non-feedback pressure system carry
out steps 1-13. For machines with pressure feedback option fitted carry out steps
14 - 17.
Non Feedback 1. Press Calibrat Heights (F2).
Change
Squeegee
Calibrat
Heights
Exit
The message ‘Ensure correct squeegees are fitted!’ is displayed.
2. Press Continue (F1).
Continue
Restore
Defaults
Exit
The message ‘Set Squeegee Pressure Height’ is displayed.
Either:
3. Press Adjust (F2).
Adjust
Save Front
Squeegee
Rear
Squeegee
Step
Up
Step
Down
Exit
The following window is displayed:
4. Using Next, Previous, Incr. and Decr. (F4, F5, F6 and F7) enter the
squeegee heights parameters as necessary.
Next Previous Incr. Decr.
Exit
5. Press Exit (F8).
Next Previous Incr. Decr.
Exit
Software Version 6 User Manual 9.51
CONSUMABLE REPLENISHMENTS
SQUEEGEES
Squeegee Heights Parameters
Front Zero Ref
Rear Zero Ref
4000
4040