Horizon UserManualV6 - 第357页

16. Select Use (F1). Use Next Previous Exit 17. Select Exit (F8). Use Next Previous Exit 18. Select Proceed (F1). Proceed Select Another The ProFlow unit is placed in contact with the screen. 19. Open the front printhead…

10. Press the System button.

11. Select Exit (F8).

Exit

12. Select Yes (F1).

Yes

Remove

Cover

The message ‘The ProFlow unit will be placed in the REAR envelope’ is

displayed.

13. If the ProFlow unit is required to be placed in another envelope continue with

Step 14. If the ProFlow unit is required to be placed in the machine preferred

envelope go to Step 18.

14. Select Select Another (F8).

Proceed

Select

Another

The following window is displayed:

15. Use the Next or Previous keys (F4 or F5) to highlight Front.

Use

Next Previous

Exit

9.56 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

PROFLOW

Preferred Envelope

REAR

FRONT

16. Select Use (F1).

Use

Next Previous Exit

17. Select Exit (F8).

Use Next Previous

Exit

18. Select Proceed (F1).

Proceed

Select

Another

The ProFlow unit is placed in contact with the screen.

19. Open the front printhead cover.

Software Version 6 User Manual 9.57

CONSUMABLE REPLENISHMENTS

PROFLOW

20. To gain access to the transfer head (1), release the latch on the front of the

pressure mechanism (2) and raise the mechanism forward and upwards to

engage the spring locking device.

NOTE

Numbers in brackets refer to figure below.

21. To release the carrier from the transfer head, unscrew the thumbscrews (1) at

each end of the carrier to loosen the clamp brackets. Hinge the clamp

brackets (2) outwards. Hinge the carrier and paste cassette (3) towards the

front of the machine exposing the top of the paste cassette.

NOTE

Numbers in brackets refer to figure below.

9.58 User Manual Software Version 6

CONSUMABLE REPLENISHMENTS

PROFLOW