Horizon UserManualV6 - 第36页
10. Press the System button. 11. Select Change Screen (F5). Mode Load Data Edit Data Setup Squeegee Change Screen Change Tooling Change Language Exit 12. Select Mode (F1) until Step is displayed in the printer status win…
7. Close the two outer toggle levers.
8. Load the stencil to the machine, ensuring the correct orientation of the
stencil.
9. Close the front printhead cover.
Software Version 6 User Manual 1.19
MACHINE PROGRAMMING
STAGE 4C
10. Press the System button.
11. Select Change Screen (F5).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
12. Select Mode (F1) until Step is displayed in the printer status window.
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
13. Select Exit (F8).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
14. Select Run (F1).
Run
Head Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
15. Place a board on the conveyor.
16. Select Auto Board (F1).
Auto
Board
Manual
Board
Knead
Paste
Exit
17. Select Step (F1) until the board is raised to Print Height.
Step
Head Single Exit
1.20 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 4C
18. Open the front printhead cover.
19. Rotate the operator switch on the operator interface to the right. When the
pneumatic indicator displays green, ensure all the Formflex pins have risen.
NOTE
The operator switch must remain in the latched position Pins Up whilst the
current product setup is required.
20. Close the front printhead cover.
Software Version 6 User Manual 1.21
MACHINE PROGRAMMING
STAGE 4C