Horizon UserManualV6 - 第45页
12. Slide a board along the rails to abut the board stop. 13. Select Board Clamps (F3), to close the clamps. Adjust Board Clamps Set Stop Exit 14. Position the outermost support pins on the rising table under the board. …
6. Select Change Tooling (F6).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
7. Select Home Cleaner (F3).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
8. Select Board Stop (F4).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The camera moves to the board stop position. The board stop on the camera
extends.
9. Select Open Cover (F2).
Adjust
Open
Cover
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
10. Open the front printhead cover.
11. Select Board Clamps (F3), to open the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
1.28 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5A
12. Slide a board along the rails to abut the board stop.
13. Select Board Clamps (F3), to close the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
14. Position the outermost support pins on the rising table under the board.
15. Select Board Clamps (F3), to open the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
16. Remove the board and select Board Clamps (F3), to close the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
Software Version 6 User Manual 1.29
MACHINE PROGRAMMING
STAGE 5A
17. Complete the positioning of the support pins.
18. Select Board Clamps (F3), to open the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
19. Slide the board back along the rails to abut the board stop.
20. Select Board Clamps (F3), to close the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
21. Close the front printhead cover.
22. Press the System button.
1.30 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5A