Horizon UserManualV6 - 第53页
9. Lift the front printhead cover. 10. The vacuum box can now be fitted into the appropriate location holes in the tooling plate. Ensure the vacuum box is placed into the correct set of holes taking regard of the type of…
4. Close the front printhead cover.
5. Press the System button.
6. Select Change Tooling (F6).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
The print carriage and the under screen cleaner are moved to the rear.
7. Select Full Width (F5).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The message ‘Checking for a board on the belts’ is displayed. Whilst the rear
rail is moving the following message ‘Rail Moving...’ is displayed.
8. Select Open Cover (F2).
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
1.36 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5B
9. Lift the front printhead cover.
10. The vacuum box can now be fitted into the appropriate location holes in the
tooling plate. Ensure the vacuum box is placed into the correct set of holes
taking regard of the type of screen being used. Connect the vacuum hose to
the vacuum box inlet, ensure the hose is routed clear of any moving parts.
11. Lower the front printhead cover.
Software Version 6 User Manual 1.37
MACHINE PROGRAMMING
STAGE 5B
12. Press the System button.
13. Select Home Cleaner (F3).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
14. Select Board Width (F5).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Board
Width
Load
Width
Print
Height
Exit
15. Select Board Stop (F4).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The camera moves to the board stop position. The board stop on the camera
extends.
16. Select Open Cover (F2).
Adjust
Open
Cover
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
17. Open the front printhead cover.
1.38 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5B