Horizon UserManualV6 - 第61页
4. Close the front printhead cover. 5. Press the System button. 6. Select Change Tooling (F6). Mode Load Data Edit Data Setup Squeegee Change Screen Change Tooling Change Language Exit The print carriage and the under sc…
STAGE 5C
Tooling Setup - Dedicated Tooling System
CAUTION
BOARD CLAMPS. Care must be taken to ensure that the board clamps
are not damaged when removing or replacing tooling.
1. Select Change Screen (F5).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
The message ‘Open Front Cover and Remove Screen’ is displayed.
2. Open the front printhead cover.
3. Remove the stencil from the printer.
1.44 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5C
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN
WORKING IN THE TOOLING AREA OF THE MACHINE TO AVOID
INJURY. THE FOILS ON THE FRONT AND REAR BOARD CLAMPS
ARE VERY SHARP.
4. Close the front printhead cover.
5. Press the System button.
6. Select Change Tooling (F6).
Mode Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
The print carriage and the under screen cleaner are moved to the rear.
7. Select Full Width (F5).
Adjust Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
The message ‘Checking for a board on the belts’ is displayed. Whilst the rear
rail is moving the following message ‘Rail Moving...’ is displayed.
8. Select Open Cover (F2).
Adjust
Open
Cover
Home
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Software Version 6 User Manual 1.45
MACHINE PROGRAMMING
STAGE 5C
9. Lift the front printhead cover.
10. Fit the tooling tower to the manual plate. Ensure the dowels on the front edge
of the tooling tower base are correctly seated in the holes in the front edge of
the manual tooling plate.
11. Verify the plate assembly orientation and fit the assembly to the tooling
tower. Ensure the dowels of the plate assembly are correctly seated in the
holes in the tooling tower.
1.46 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5C
View on Rear of Tooling Plate