Horizon UserManualV6 - 第85页

33. Close the front printhead cover. 34. Press the System button. 35. Select Exit (F8). Adjust Change Screen Board Clamps Set Stop Exit 36. Select Home Position (F7). Open Cover Home Position Exit 37. Select Open Cover (…

100%1 / 378
26. Press the System button.
27. Select Exit (F8).
Adjust Change
Screen
Board
Clamps
Set
Stop
Exit
28. Select Home Camera (F4).
Adjust Open
Cover
Remove
Cleaner
Home
Camera
Full
Width
Load
Width
Print
Height
Exit
29. Select Print Height (F7).
Adjust Open
Cover
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
30. Select Open Cover (F2).
Open
Cover
Home
Position
Exit
31. Lift the front printhead cover.
32. Check that the setup of the tooling is adequate for the board, adjust as
necessary.
1.68 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5E
33. Close the front printhead cover.
34. Press the System button.
35. Select Exit (F8).
Adjust Change
Screen
Board
Clamps
Set
Stop
Exit
36. Select Home Position (F7).
Open
Cover
Home
Position
Exit
37. Select Open Cover (F2).
Adjust
Open
Cover
Remove
Cleaner
Board
Stop
Full
Width
Load
Width
Print
Height
Exit
Software Version 6 User Manual 1.69
MACHINE PROGRAMMING
STAGE 5E
38. Lift the front printhead cover.
39. Select Board Clamps (F3), to open the clamps.
Adjust
Board
Clamps
Set
Stop
Exit
40. Remove the board from the rails.
41. Load the appropriate stencil for the product file loaded, ensuring the correct
orientation of the stencil.
42. Lower the front printhead cover.
1.70 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 5E