Horizon UserManualV6 - 第99页

30. Select Exit (F8). Step Single Exit 31. Select Exit (F8). Auto Board Manual Board Exit Software Version 6 User Manual 1.83 MACHINE PROGRAMMING STAGE 6

100%1 / 378
A figure appears on the monitor indicating the score of the fit between the
synthetic fiducial and the actual fiducial. The synthetic fiducial parameters may
need resetting and relearning to obtain a better figure if there are other features in
the camera window.
24. Select Exit (F8).
Locate
Fiducial
Exit
25. Select Exit (F8).
Learn
Fiducial
Locate
Fiducial
Set
Light
Next Previous Incr. Decr.
Exit
26. Select Step (F1).
Step
Open
Cover
Fiducial
Setup
Adjust Search
Step
Search
Reset
Single Exit
NOTE
If selective print/pass through is enabled, the first board fiducial should now be
displayed on the monitor. In this case repeat Steps 14 - 26 for this fiducial.
The first screen fiducial should now be displayed on the monitor.
27. Repeat Steps 14 - 25 for this fiducial.
28. Continue for other selected fiducials by selecting Step at the end of each
fiducial setup.
29. After Step 28 for the second screen fiducial the message
’Saving Fiducial Data - Please Wait
Board data file saved’ is displayed.
After aligning screen to board the camera checks all four fiducial positions.
1.82 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 6
Location
Fiducial
X
Y
Score
1
0.038
-0.017
984
30. Select Exit (F8).
Step Single
Exit
31. Select Exit (F8).
Auto
Board
Manual
Board
Exit
Software Version 6 User Manual 1.83
MACHINE PROGRAMMING
STAGE 6
STAGE 7
Load Paste, Run a
Product in Step
Mode
If using squeegees with paste dispenser continue with Section Auto Paste
Dispense. If using squeegees without paste dispenser go to Section Manual
Paste Load. If using ProFlow go to Section Run a Product in Step Mode.
Auto Paste Dispense 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Auto Dispense (F1).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Select Exit (F8).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
4. Go to Section Run a Product in Step Mode.
Manual Paste Load 1. Select Paste Load (F3).
Run Open
Cover
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.
2. Select Manual Load (F2).
Auto
Dispense
Manual
Load
Load
Cart.
Print
Directn
Exit
3. Lift the front printhead cover.
1.84 User Manual Software Version 6
MACHINE PROGRAMMING
STAGE 7