Foreign Machine Interface - 第19页
FOREIGN MACHINE INTERFACE FMI POD Chapter Issue 3 Jan 08 Technical Reference Manu al 28.19 Panasonic Downline Extension Cable View on Arrow A 1 3 4 8 2 Pin 1 - Board Request (H) Pin 2 - Board Request (L) Pin 14 - Shield …
FOREIGN MACHINE INTERFACE
FMI POD
28.18 Technical Reference Manual Chapter Issue 3 Jan 08
Panasonic Upline Extension Cable
View on Arrow A
1
3
4
8
2
Pin 1 - Board Request (H)
Pin 2 - Board Request (L)
Pin 14 - Shield
A
Up Plug
PL A
AMP 206044-1
0V
View on Arrow B
1
Pin 1 - Board Request (L)
Pin 3 - Board Request (H)
3
B
Panasonic
Upline Plug
4 Pin Molex
NOTE
The 0V link between pins 3
and 4 informs the DEK M/C
that FMI hardware is fitted.
FOREIGN MACHINE INTERFACE
FMI POD
Chapter Issue 3 Jan 08 Technical Reference Manual 28.19
Panasonic Downline Extension Cable
View on Arrow A
1
3
4
8
2
Pin 1 - Board Request (H)
Pin 2 - Board Request (L)
Pin 14 - Shield
A
Down Plug
PL B
AMP 206044-1
View on Arrow B
3
1
Pin 1 - Board Request (L)
Pin 3 - Board Request (H)
B
Panasonic
Downline Plug
4 Pin Molex
FOREIGN MACHINE INTERFACE
MULTI-INTERFACE UNIT
28.20 Technical Reference Manual Chapter Issue 3 Jan 08
MULTI-INTERFACE UNIT
The DEK Multi-Interface Unit (MIU) is a communications interface that allows
DEK Printing Machines to communicate with upline and downline board han-
dlers.
The MIU stores 6 preprogrammed protocols for communications with the most
common manufacturers of board handlers. Provision has been made for
extending the list of available types to 16.
The upline and downline protocols are selected using the Protocol Selection
switches on the MIU, Protocol Selection section refers. The upline and down-
line selectors are independent of each other allowing the upline and downline
machines to be of different protocols.
Power supplies of +24V and +12V power the communications devices of the
associated upline and downline handlers. Input signals to the unit are opto-
isolated. Relay or open collector output driver signals are available for the MIU
outputs.
Internal links are provided between the upline connector (M1SK1) and the
downline connector (M1SK2) which may be used if communication is required
to by-pass the DEK machine.