00197975-06_UM_TX-Serie_EN - 第120页
3 Technical data and assemblie s User manual SIPLACE TX-Series 3.5 Placement head From software version 713.0 Edition 01/2020 120 3.5 Placement head 3.5.1 SIPLACE SpeedSt ar C&P20 P /C&P2 0 M2 3 There are two SIP…
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.4 Overview of the modules
119
3.4 Overview of the modules
3
3
Fig. 3.4 - 1 Component overview - example of SIPLACE TX2
(1) Location 1 with component trolley, tape cutter, empty tape duct
(2) Monitor at location 1
(3) Gantry at location 1 (placement head, depending on configuration)
(4) Gantry at location 2 (placement head, depending on configuration)
(5) Monitor at location 2
(6) Location 2 with component trolley, tape cutter, empty tape duct
(7) Board conveyor
(T) Direction of PCB transport
(1)
(3)
(4)
(6)
(2)
(7)
(5)
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
120
3.5 Placement head
3.5.1 SIPLACE SpeedStar C&P20 P /C&P20 M2
3
There are two SIPLACE SpeedStar variants available for the SIPLACE TX-Series:
– SIPLACE SpeedStar C&P20 P for top placement performance
– SIPLACE SpeedStar C&P20 M2 for high-precision placement
CAUTION
Always take hold of the handle to push the placement head
The placement head may only be moved by pushing manually against the handle provid-
ed.
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.5 Placement head
121
3.5.1.1 Overview
3
3
Fig. 3.5 - 1 SIPLACE SIPLACE SpeedStar- overview
(1) Connection for the holding circuit of the vacuum pump
(2) "Vacuum sensor holding circuit" board (under the cover)
(3) Star motor
(4) Handle (red for C&P20 M2)
(5) DP drive
(6) Nozzle
(7) Pressure control valve
(8) Z motor (linear motor)
(9) Return cylinder
(5)
(1)
(7)
(2)
(3)
(4)
(6)
(8)
(9)