00197975-06_UM_TX-Serie_EN - 第125页
User manual SIPLACE TX-Series 3 Technical data and assemblies From software version 713.0 Edition 01/2020 3.5 Placement head 125 3.5.3.2 Overview - type VX4.25/0-47 IE3 Item no. 03224400- xx V acuum pump VX4.25/0-47 IE3 …
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
124
3.5.2 Sensor for the component reject bin
The sensor for the component reject bin monitors whether the reject bin is seated correctly in its
mount.
– If the reject bin was not inserted correctly, the placement machine cannot be started.
– If the reject bin jumps out of its mount during the placement process, the placement machine
will be stopped immediately to avoid a head crash.
3.5.3 Vacuum pump (optional)
The vacuum pump for the SIPLACE SpeedStar is fitted behind the cover at location 1, in the ma-
chine frame.There are two types available:
– Vacuum pump VX4.25
– Vacuum pump VX4.25/0-47 IE3
3.5.3.1 Overview - type VX4.25
Item no. 03128463-xx Vacuum pump VX4.25
3
Fig. 3.5 - 2 Overview - vacuum pump
(1) Installation location for vacuum pump
(2) Vacuum pump VX 4.25
(2)
(1)
User manual SIPLACE TX-Series 3 Technical data and assemblies
From software version 713.0 Edition 01/2020 3.5 Placement head
125
3.5.3.2 Overview - type VX4.25/0-47 IE3
Item no. 03224400-xx Vacuum pump VX4.25/0-47 IE3
3
Fig. 3.5 - 3 Overview - vacuum pump
(1) Installation location for vacuum pump
(2) Vacuum pump VX 4.25 IE3
3.5.3.3 Safety instructions for vacuum pumps
3
(2)
(1)
WARNING
Please observe the safety instructions in the vacuum pump instruction manual sup-
plied.
3 Technical data and assemblies User manual SIPLACE TX-Series
3.5 Placement head From software version 713.0 Edition 01/2020
126
3.5.3.4 Description
Only the SIPLACE SpeedStar can be operated with the vacuum pump. The SIPLACE SpeedStar
with vacuum pump is available as an option for the SIPLACE TX.
When operated with a vacuum pump, the compressed air consumption for the SIPLACE Speed-
Star is reduced considerably. One vacuum pump can supply up to two SIPLACE SpeedStar
heads. The running costs will fall according to the energy costs incurred.
The vacuum pump is switched on and off with the placement machine. The station software auto-
matically takes into account an overrun time of 6 minutes, to prevent the motor overheating.
3
3.5.3.5 Maintenance instructions
Observe the additional maintenance instructions for the vacuum pump.
Read the relevant section in the maintenance manual for your placement machine.
PLEASE NOTE
The compressed air consumption values can be found in section 3.2.3
, page 112.