00197975-06_UM_TX-Serie_EN - 第273页
User manual SIPLACE TX-Series 5 Tasks at the placement machine From software version 713.0 Edition 01/2020 5. 14 Docking the comp onent trolley in or out 273 5.14 Docking the component trolley in or out 5.14.1 Safety ins…
5 Tasks at the placement machine User manual SIPLACE TX-Series
5.13 Avoiding track errors From software version 713.0 Edition 01/2020
272
5.13.2 Component coordinate system and pickup angle
5
Fig. 5.13 - 1 Position of the component and its pick-up angle
Special
component
Stick
magazine:
Chip-
components
with polarity
0402
2220
The anode must be
aligned with the +X
coordinate.
Package form 0° coordinate system
Position in the feeder module
Pickup angle/
nozzle angle
Tape:
SOT 23
Stick
magazine:
Tape:
Tape:
SO-IC
DIL-IC
SOT 194
Tape:
Holes
Y
X
Y
X
Y
X
Y
X
Y
X
90°
90°
0°
90°
-90°
0°
User manual SIPLACE TX-Series 5 Tasks at the placement machine
From software version 713.0 Edition 01/2020 5.14 Docking the component trolley in or out
273
5.14 Docking the component trolley in or out
5.14.1 Safety instructions for docking component trolleys in and out
Also follow the safety instructions given in section 2.4.10, page 78.
5
5
There is a button at each location (1 and 2). The safety concept for the component trolley change-
over specifies that the operator should push this button at the relevant placement machine loca-
tion, to dock or undock the component trolley.
WARNING
DANGER OF CRUSHING!
Risk of crushing when docking and undocking the component trolley.
Always dock/undock the component trolley alone.
When docking and undocking, make sure that there are no body limbs in the travel
area of the component trolley.
PLEASE NOTE
Docking only possible if protective cover is closed
Close the protective covers.
5 Tasks at the placement machine User manual SIPLACE TX-Series
5.14 Docking the component trolley in or out From software version 713.0 Edition 01/2020
274
5
Fig. 5.14 - 1 Safety instructions for docking and undocking the component trolley (example of location 2)
(1) Button for docking and undocking the component trolley at location 2
(2) Handles
(T) Direction of PCB transport
(1)
(2)