00197975-06_UM_TX-Serie_EN - 第279页
User manual SIPLACE TX-Series 6 Station extensions From software version 713.0 Edition 01/2020 6.1 Nozzle changer 279 6.1.2.3 Configuration example with SIPLACE C&P20 P / C&P20 M2 A nozzle changer with four magaz…
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
278
6.1.2.1 Nozzle changer for C&P20 P / C&P20 M2 with 4 magazines
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 03101503-xx Nozzle magazine 40xx with 20 garages
6
Fig. 6.1 - 1 Nozzle changer for the SIPLACE SpeedStar C&P20 P / C&P20 M2 with 4 magazines
6.1.2.2 Technical data
6
Nozzle changer for the SIPLACE SpeedStar (C&P20 P / C&P20 M2)
Number of magazines per location
*a
SIPLACE TX
*)a All magazines in the nozzle changer must be configured.
4
Number of nozzle garages per location
SIPLACE TX 80
Standard configuration
SIPLACE TX per location 4 magazines with 80 nozzle garages
Nozzle types 40xx
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
279
6.1.2.3 Configuration example with SIPLACE C&P20 P / C&P20 M2
A nozzle changer with four magazines for the SpeedStar can be installed at both locations 1 and
2 (item 1 in fig. 6.1 - 2
, page 279).
6
Fig. 6.1 - 2 Position of nozzle changer for the SIPLACE SpeedStar - configuration example SIPLACE TX2i
6
6
NC CP20
Nozzle changer for C&P20 P or C&P20 M2 with 4 magazines
COT 40 In
Component trolley in the innermost position
PLEASE NOTE
The placement machine stops if magazines are missing
In the event of missing or incorrectly positioned magazines, the safety circuit will stop the
placement machine.
Use all magazine places.
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
280
6.1.2.4 Assembly
The nozzle changers are fixed to the COT insert.
Align the nozzle changer so that the sloping side points towards the COT insert.
6
6.1.2.5 Notes on operation
When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
6
Open the locking plate and place the nozzles in the nozzle holders.
Close the locking plate so that the nozzles cannot drop out of the magazines.
6
6
Programming the nozzle changer is described in the SIPLACE Pro user manual.
6.1.2.6 Changing the magazine
Press the lever (item 1 in fig. 6.1 - 3, page 282), to release the magazine from the balls of the
snap fasteners (item 5 in fig. 6.1 - 3
, page 282). Lift the magazine off the base.
WARNING
Risk of head crashes with mixed configurations!
There is a risk of head crashes with mixed configurations.
Only install the associated nozzle changer for each placement head, with the nozzle
magazines for the respective placement head.
PLEASE NOTE
Fill the magazines outside the placement machine and only replace complete mag-
azines.
CAUTION
Filling up magazines!
Before you fill magazines, make sure that all the nozzles on the Collect&Place head
have
been returned to their magazines.
PLEASE NOTE
Risk of jamming!
If components fall onto magazines, there is a risk that the locking plate could jam.
Do not allow components to drop onto the magazines.
You should therefore regularly clean the magazines and free locations.