00197975-06_UM_TX-Serie_EN - 第282页
6 Station extensions User manual SIPLACE TX-Series 6.1 Nozzle changer From software version 713.0 Edition 01/2020 282 6 Fig. 6.1 - 3 Changing the nozzle changer for the C&P20 P / C&P20 M2 maga zine (1) Lever for …
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
281
6
WARNING
Risk of head crashes with protruding lever
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 3
) can result in a head
crash.
You should therefore make sure that the lever does not protrude over the maga-
zines.
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
282
6
Fig. 6.1 - 3 Changing the nozzle changer for the C&P20 P / C&P20 M2 magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
6
PLEASE NOTE
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
6.1 - 3
, page 282) slide into the centering holes and slot.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
283
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 3, page 282).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.2.7 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 4 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position