00197975-06_UM_TX-Serie_EN - 第283页
User manual SIPLACE TX-Series 6 Station extensions From software version 713.0 Edition 01/2020 6.1 Nozzle changer 283 Place the magazine on the snap fasten er balls (item 5 in fig. 6. 1 - 3 , page 282 ). Press the ma…
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
282
6
Fig. 6.1 - 3 Changing the nozzle changer for the C&P20 P / C&P20 M2 magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
6
PLEASE NOTE
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
6.1 - 3
, page 282) slide into the centering holes and slot.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
User manual SIPLACE TX-Series 6 Station extensions
From software version 713.0 Edition 01/2020 6.1 Nozzle changer
283
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 3, page 282).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.2.7 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 4 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position
6 Station extensions User manual SIPLACE TX-Series
6.1 Nozzle changer From software version 713.0 Edition 01/2020
284
6.1.3 Nozzle Changer for the SIPLACE MultiStar CPP / CPP M
6.1.3.1 Nozzle changer for the CPP with 4 magazines
Item no. 00119742-xx Nozzle changer for CPP - short
or 6
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
6
Fig. 6.1 - 5 Nozzle changer for the SIPLACE MultiStar with 4 magazines
(1) Nozzle magazine for 20xx nozzles
(2) Nozzle magazine for 28xx nozzles
This nozzle changer accommodates 4 magazines. The magazines are fitted onto a common car-
rier pate, are fixed with two cylinder pins and fastened with 4 push buttons. The exact position is
determined with two fiducials on each magazine. The correct seat of the magazines on the carrier
plate is monitored by microswitches, to prevent a collision of the placement head with any maga-
zines projecting upwards. All 4 magazine locations must be filled since the safety circuit stops the
placement machine in response to missing magazines or magazines that are not seated correctly.
The nozzle changer recognizes whether the nozzle magazine is for 20xx nozzles or for 28xx noz-
zles by the nozzle magazine code.
At the nozzle station, components can be rejected with an air blast by the nozzles. Nozzles can
be stripped off there and disposed of in the reject bin.
(2)
(1)