00197975-06_UM_TX-Serie_EN - 第62页

2 Operational safety User manual SIPLACE TX-Series 2.2 Warning labels From software version 713.0 Edition 01/2020 62 2.2.7.1 High T emperatures on the SIPLACE CPP / CPP M 1 in fig. 2.2 - 1 0 , page 61 (quantity per SIPLA…

100%1 / 346
User manual SIPLACE TX-Series 2 Operational safety
From software version 713.0 Edition 01/2020 2.2 Warning labels
61
2.2.7 Warning Labels on the SIPLACE MultiStar CPP / CPP M
2
Fig. 2.2 - 10 Warning labels on the SIPLACE MultiStar CPP / CPP M
(1) Temperature label, item no. 03031926-01
Item W laser class 2, item no. 03134118-01
(1)
W laser class 2
2 Operational safety User manual SIPLACE TX-Series
2.2 Warning labels From software version 713.0 Edition 01/2020
62
2.2.7.1 High Temperatures on the SIPLACE CPP / CPP M
1 in fig. 2.2 - 10
, page 61 (quantity per SIPLACE CPP / CPP M: 1)
2.2.7.2 Laser class 2 on the component sensor
2
W laser class 2 in fig. 2.2 - 10, page 61, item no. 03134118-01 (quantity per CPP / CPP M: 1)
2
2
2
High temperatures on the SIPLACE CPP / CPP M during continu-
ous operation
Risk of burns due to high temperatures!
The Z drive (linear motor) can develop high surface temperatures
during continuous operation, if the ambient temperature is greater
than 22°C.
Be careful when touching the parts.
2
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
Do not look into beam!
User manual SIPLACE TX-Series 2 Operational safety
From software version 713.0 Edition 01/2020 2.2 Warning labels
63
2.2.8 Warning label W 205 on tape cutter
2
Fig. 2.2 - 11 Warning label on the top of tape cutter
Item W 205, item no. 03009344-01
2
2
2
WARNING
Risk of cuts
Risk of cuts from sharp blades when working on the tape cutter!
Wear robust protective gloves when working on the tape cutter.
WARNING
Risk of injuries
Risk of injuries from pressurized compressed-air lines when working on the tape cutter.
Disconnect the placement machine from the mains supply and the compressed air
supply, before you start work on the tape cutter.
Wait until the operating pressure has dropped to 0 MPa.
W 205