00192809-01 - 第12页
2 Safety User M anual V 1.15 - P roductivity Lift 2.2 Safety concept Software version V 40. 1 1 Edition 01/2001 4 3UHVFUL EHGXVH The presc ribed us e of th e devic e cover s the foll owing: The Produc tivity Lif…
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.1 Overview
3
6DIHW\
This chapter contains information on how to make safe and optimum use of the device described
here.
2YHUYLHZ
This device poses very few risks and is simple and safe for the informed user to operate. Users
who do not possess sufficient knowledge, however, can cause damage to the device by perform-
ing illegal operations. This chapter provides information regarding the requirements for safe and
optimum operation of the device.
All those authorised to operate, maintain and repair the device must read chapter "Safety".
6DIHW\FRQFHSW
The safety concept controls the authorisation to use the device and the responsibility of the indi-
vidual users.
This device has been developed and constructed in accordance with the latest technological
standards and the approved safety regulations. It therefore conforms to EU requirements.
,QWHQGHGXVHRIWKHGHYLFH
The device was designed for its use as prescribed. If it is used for anything other than the appli-
cation listed, the manufacturer can not be held responsible for any damage that may occur as a
result.
2 Safety User Manual V 1.15 - Productivity Lift
2.2 Safety concept Software version V 40.11 Edition 01/2001
4
3UHVFULEHGXVH
The prescribed use of the device covers the following:
The Productivity Lift serves to increase the throughput of Siplace automatic placement machines.
Every lift unit has a placement machine of this type. Several lift units arranged in series thus en-
able the parallel arrangement of placement machines although these are physically arranged in a
row.
At the inlet of the first lift unit (input module), printed circuit boards can be transferred on two par-
allel tracks. They are then delivered to the first subsequent placement machine for processing. If
this placement machine is currently occupied or perhaps even out of service, the transferred
PCBs are forwarded to the next placement machine but one. It is however necessary that this
placement machine is of the same type as the previous one. The type of placement machine can
change within such a line of placement machines by means of the relevant settings in the device
configuration. The final module at the end of such a line hands the assembled printed circuit
boards over to the following production line.
,QDSSURSULDWHXVH
Any use made of the device, other than the "prescribed use", without the written consent of the
manufacturer or operating the device beyond the scope of the technical restrictions, is considered
inappropriate.
127(
The technical restrictions can be found in the "Technical Data" chapter of these operating instruc-
tions.
:$51,1*
Inappropriate use of this equipment can result in injury. Please comply with these operating in-
structions.
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.2 Safety concept
5
2SHUDWLQJPRGHV
The device can be operated in two modes, "normal operating mode" and "special operating
mode".
1RUPDORSHUDWLQJPRGH
The normal operating mode, all functions and tasks for which the device was designed are per-
formed automatically. An operator is only required if the device is used as a work station (e.g.
transport module TM6V), or with a magazine buffer or loading/unloading station where magazines
can be exchanged. Also included in the normal operating mode is the removal of faults e.g.
jammed PCBs from areas of the device, which are accessible via doors or covers without the us-
age of tools. If a tool is necessary in order to remove the fault this counts to the special operating
mode.
6SHFLDORSHUDWLQJPRGH
The special operating mode covers all activities, which are not included in the normal operating
mode. These are the set-up-operating mode, device maintenance and cleaning and the removal
of faults with tools as well as the repair of the device.
8VHUUROHV
In order to guarantee safety, the user of the device must fulfil certain requirements. Only those
who fulfil the requirements shall be authorised to use the device.
A user designates anyone who works with the device. Since the user requirements depend to a
large extent on their activity, the following user roles have been defined:
2SHUDWRU
The operator is the contracting party of the manufacturer. The manufacturer may legally impose
conditions on the contracting party when the device is purchased.
The operator makes prescribed use of the device and authorises those entitled to work with the
device in one of the defined user roles. They too shall be obliged to instruct the users.