00192809-01 - 第24页
2 Safety User M anual V 1.15 - P roductivity Lift 2.6 Attaching safety st ickers Software version V 40.1 1 Edition 01/2001 16 $ WW DFKLQJVDIHW\VWLFNHUV The foll owing safe ty st ickers m ust be attached to the sys …
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.5 Transport and assembly locks
15
1. The following picture shows where the installation aid is kept when it is not in use.
2. Before carrying out any work that is required at either of the two lift units, the installation lock
must be press-fitted as shown in the figure below on the piston rod of the cylinder. To this end,
the lift must be transported to its uppermost position.
2 Safety User Manual V 1.15 - Productivity Lift
2.6 Attaching safety stickers Software version V 40.11 Edition 01/2001
16
$WWDFKLQJVDIHW\VWLFNHUV
The following safety stickers must be attached to the system as described below. The mainte-
nance plan contains a check for these stickers.
6WLFNHUVXVHG
'DQJHURIFUXVKLQJZDUQLQJ
Danger of crushing
&UXVKLQJRIILQJHUV
Crushing of fingers
(OHFWULFDO&$87,21
Electrical (CAUTION)
User Manual V 1.15 - Productivity Lift 2 Safety
Software version V 40.11 Edition 01/2001 2.6 Attaching safety stickers
17
3RVLWLRQLQJWKHVWLFNHUV
,QSXWDQGRXWSXWPRGXOH