SIPLACE D1 规格说明书英文版 - 第14页
14 Placement Heads Nozzle Changers Description Nozzle changers incr ease the flexibility of placement heads when processin g dif- ferent com ponents. T he noz- zle configuration can be quickly modified for new placement …
13
Placement Heads
Pick&Place head
Pick&Place head
fine-pitch camera
CO camera type 36
Pick&Place head
fine-pitch camera
CO camera type 33
Pick&Place head
flip-chip camera
CO camera type 25
Component range
a
a) Please note that the range of components that can be placed is also affected by the pad geometry, customer-
specific standards, component packaging tolerances and component tolerances
0603 to SO, PLCC,
QFP, BGA, special
components, bare
dies, flip-chips
0402 to SO, PLCC,
QFP, BGA, special
components, bare
dies, flip-chips
0201 to SO, PLCC, QFP,
sockets, plugs, BGA, spe-
cial components, bare
dies, flip-chips, shields
Component specs
max. height
min. lead pitch
min. lead width
min. ball pitch
min. ball diameter
min. dimensions
max. dimensions
max. weight
b
b) If standard nozzles are used
19 mm
0.4 mm
0.24 mm
0.56 mm
0.32 mm
1.6 x 0.8 mm²
32 x 32 mm²
(single measurement)
85 x 85 mm² or
max. 200 x 125 mm²
(with restrictions)
100 g
19 mm
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 x 0.5 mm²
55 x 45 mm²
(single measurement)
85 x 85 mm² or
max. 200 x 125 mm²
(with restrictions)
100 g
19 mm
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 x 0.3 mm²
16 x 16 mm²
(single measurement)
100 g
Programmable set-down
force 1.0 N - 15 N 1.0 N - 15 N 1.0 N - 15 N
Nozzle types
c
c) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available
online
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
X/Y accuracy
d
d) The accuracy value was measured using the vendor-neutral IPC standard
± 37.5 µm/3
± 50 µm/4
± 37.5 µm/3
± 50 µm/4
± 30 µm/3
± 40 µm/4
Angular accuracy ± 0.053°/3
± 0.071°/4
± 0.053°/3
± 0.071°/4
± 0.053°/3
± 0.071°/4
Component range 99.8% 99.9% 99.8%
Component camera type 36 33 25
Illumination levels 6 6 6
Possible illumination
level settings
256
6
256
6
256
6
14
Placement Heads
Nozzle Changers
Description
Nozzle changers increase
the flexibility of placement
heads when processing dif-
ferent components. The noz-
zle configuration can be
quickly modified for new
placement jobs. Exactly
defined positions and the per-
fect seating of the nozzle in
the garage guarantee mini-
mal radial eccentricity at the
placement head.
One nozzle changer (NCH
P&P) may be installed for the
Pick&Place head at
location 2.
The supporting plate can hold
up to 10 magazines for stan-
dard or special nozzles or
grippers.
Standard configuration:
2 x standard magazine
1 x special nozzle
Magazine for 12
type 9xx nozzles
Nozzle changer for the
12-nozzle Collect&Place head (NCH12)
Nozzle changer for the
6-nozzle Collect&Place head (NCH6)
Magazine for 6
type 9xx nozzles
Magazine for two
standard nozzles
Magazine for one
special nozzle, gripper
Nozzle changer for the TwinHead
Magazine for 6
type 8xx nozzles
15
Placement Heads
Nozzle Changers
Technical Data
Nozzle changer for the 12 nozzle Collect&Place head
Dimensions (length x width x height) 565 x 63 x 78 mm³
Number of magazines min. 1 / max. 6, each with 12 nozzle holders
Nozzle types 9xx
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the 6-nozzle Collect&Place head
Dimensions (length x width x height) 565 x 69 x 87 mm³
Number of magazines min. 1 / max. 4, each with 6 nozzle holders
Nozzle types 8xx, 9xx
Compressed air connection 0.48 MPa (4.8 bar)
Nozzle changer for the SIPLACE Pick&Place head
Dimensions (length x width x height) 192 x 138 x 314 mm³
Number of magazines max. 10 each with two nozzles
Number of nozzle holders may be freely configured
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper