SIPLACE D1 规格说明书英文版 - 第21页
21 Component Feeding Component Changeover Table Technical Data Length Length with handles fold ed up 715 mm 881 mm Width 570 mm Height of botto m edge of table bed 680 mm for 830 mm PCB transport height 750 mm for 900 mm…
20
Component Feeding
Component Changeover Table
SIPLACE component
changeover tables are stand-
alone modules that are easy
to maneuver and can be
docked into the machine.
This ensures that the table is
accurately positioned in the
placement machine. Reels
are kept in the tape container
on the component change-
over table. A cutting device
on the machine automatically
cuts the used tape. Option-
ally, a waffle-pack changer
may be installed at location
1.
The component changeover
tables can be set up directly
on the machine or in an
external set-up area with
feeder modules. The benefits
of offline set-up are that the
set-ups can be prepared
without stopping the line.
This allows the set-up to be
changed very quickly using
the changeover table prin-
ciple.
The component feeders are
at rest during the placement
process, which means that
components can be refilled
and tapes may be spliced
without stopping the
machine. If an optional com-
ponent barcode reader and
the Setup Center option are
installed, it is possible to read
and check the barcodes on
the tape reels. This makes
sure that the component is
allocated to the right track,
and the PCB placement can
be traced using traceability
software.
Dummy feeder modules are
used at unassigned locations
to protect the operators.
21
Component Feeding
Component Changeover Table
Technical Data
Length
Length with handles folded up
715 mm
881 mm
Width 570 mm
Height of bottom edge of table bed 680 mm for 830 mm PCB transport height
750 mm for 900 mm PCB transport height
780 mm for 930 mm PCB transport height
800 mm for 950 mm PCB transport height
Weight
without feeder modules
with feeder modules at all
locations
77.5 kg
132.0 kg
Reel diameter
standard
maximum
up to 432 mm (17")
483 mm (19")
Locations for feeder modules max. 15 (3 x 8 mm S)
Changeover time < 1 minute
Component Feeding 2 CO changeover tables with tape reel holders and
integral waste containers,
15 slots, 30 mm wide per changeover table or
1 waffle-pack changer in place of one component
changeover table (location 1), 5 additional locations for
30 mm wide feeder modules
Feeder module types Component tapes, bulk cases, stick magazines, dip
module, waffle-pack trays, OEM feeder modules (surf
tape, component disposal module, waffle-pack trays,
Jedec trays, label feeder modules, inline programming
feeder modules)
Component feeder table
Waste container
for remaining empty tape
Tape container
Communication-
unit
22
Component Feeding
S Tape Feeder Modules
Packaging Feeder module Width Loca-
tions
Transport
distance
Max.
CO height
Paper and
blister tapes
2 x 8 mm S
a
3 x 8 mm S
a
3 x 8 mm S 01005
b
3 x 8 mm S 0201
c
3 x 8 mm SL
d
1 x 12/16 mm S
a) Fiducial for feeder module position recognition
b) for 01005, 0201 and 0402 in paper tapes
c) For 0201 and 0402 in paper tapes
d) SL = Shutterless, from 0201 in paper or blister tapes
30.6 mm
30.6 mm
30.6 mm
30.6 mm
30.6 mm
30.3 mm
1
1
1
1
1
1
2/4 mm
2/4/8 mm
2/4 mm
2/4 mm
2/4/8 mm
4/24 mm
e
e) Variable in 4 mm increments
2.5 mm
f
2.5 mm
0.7 mm
0.7 mm
2.5 mm
14 mm
f
f) PSA Kit available as an option
Blister tapes 1 x 24/32 mm S
1 x 24/32 mm SDP
g
1 x 44 mm S
1 x 44 mm SDP
g
1 x 56 mm
1 x 56 mm SDP
g
1 x 72 mm S
1 x 88 mm S
g) DP = Deep Pocket
42.4 mm
42.4 mm
54.6 mm
54.6 mm
66.6 mm
66.6 mm
82.6 mm
98.6 mm
1.5
1.5
2
2
2.5
2.5
3
3.5
4/40 mm
e
4/40 mm
e
4/52 mm
e
4/52 mm
e
4/68 mm
e
4/68 mm
e
4/80 mm
e
4/96 mm
e
14 mm
24 mm
14 mm
24 mm
14 mm
24 mm
14 mm
14 mm
Tape reels 178 - 483 mm diameter (7" - 19")
Cycle S feeder modules up to 20 mm transport distance < 150 ms
Changeover
time
15 s