SIPLACE D1 规格说明书英文版 - 第26页

26 Component Feeding Waffle-Pack Changer Description If the placement process requires componen ts to be supplied in several waffle- pack trays, we recommend an automatic magazi ne change using a waffle -pack changer (W …

Component Feeding

Waffle-Pack Tray Holder

Description

The waffle-pack tray holder

is a device for holding

JEDEC trays used to supply

components. The holder is

placed on the component

table like a feeder module

and the waffle-pack trays are

changed manually.

The tray holder set-up is

recommended if there are

just a few component types

to be placed from a waffle-

pack tray.

Waffle-pack tray holder

Technical data

Holder for large waffle-pack tray

Dimensions LxWxH 425 x 264 x 113 mm³

Locations filled on the

component table

Possible positions Location 1

Range of placement heads P&P, C&P6, C&P12

Holder for small waffle-pack tray

Dimensions LxWxH 425 x 140 x 113 mm³

Locations filled on the compo-

nent table

Possible positions Location 1

Range of placement heads P&P, C&P6, C&P12

Max. waffle-pack tray height

including component

C&P12

C&P6

P&P

12.5 mm

28.5 mm

Component Feeding

Waffle-Pack Changer

Description

If the placement process

requires components to be

supplied in several waffle-

pack trays, we recommend

an automatic magazine

change using a waffle-pack

changer (WPC). The WPC

set-up is precisely matched

to the placement sequence

in order to optimize the tim-

ings and distances traveled.

One bin with component

trays moves in the vertical

direction until the desired

magazine is within the range

of the feed axis.

The horizontal feed axis

transports the tray from the

tray supply to within the

range of the placement head.

The first magazine is made

available as soon as a PCB

moves onto the PCB con-

veyor, and valid panel and

set-up data is available. All

other magazine changes are

carried out time-neutrally

during the placement pro-

cess. Defective components

are returned to the original

tray.

The waffle-pack changer can

be docked into location 1 on

the D1 machine.

It does not take up the entire

width of a location. The com-

ponent table integrated into

the upgrade kit has a capac-

ity of 5 locations for feeder

modules.

Upgrade kit

WPC

Component Feeding

Waffle-Pack Changer

Technical Data

Dimensions, weight

Electrical ratings

Permitted environmental

factors

Dimensions (L x W) 1560 x 360 mm²

Height

830 mm ± 15 mm PCB transport height

900 mm ± 15 mm PCB transport height

930 mm ± 15 mm PCB transport height

950 mm ± 15 mm PCB transport height

1360 mm ± 15 mm

1430 mm ± 15 mm

1460 mm ± 15 mm

1480 mm ± 15 mm

Weight approx. 240 kg

Load per unit area 4.19 kN/m²

Dimensions of the waffle-pack tray (L x W x H) 360 x 260 x 6 mm³

Weight of the waffle-pack tray carrier 0.8 kg

Waffle-pack tray dimensions including components 341 x 235 x 15 mm³

max. 341 x 235 x 23 mm³

Weight of the waffle-pack tray carrier including waffle-pack trays

and components max. 1.2 kg

Storage capacity for waffle-pack tray carriers max. 28

Total weight of the 28 waffle-pack tray carriers 27.6 kg

Weight for magazine storage unit, waffle-pack tray carriers, waffle-

pack trays and components max. 50 kg

Changeover time for waffle-pack tray carrier

over 1 level

over 10 levels

over 27 levels

1.9 s

2.3 s

2.9 s

Supply voltage 3 x 208 VAC ± 5 %; 50/60 Hz (U.S.A. version)

3 x 230 VAC ± 5 %; 50/60 Hz

3 x 380 VAC ± 5 %; 50/60 Hz

3 x 400 VAC ± 5 %; 50/60 Hz (European version)

3 x 415 VAC ± 5 %; 50/60 Hz

Nominal apparent power 800 VA

Rated current 0.7A at 3 x 400 VAC

Fuses 3 x 10 or 3 x 16 A

Room temperature between 15 °C and 35 °C

Atmospheric humidity 30 - 90%

(No higher than 45% on average to prevent any

possibility of condensation on the machine)