SIPLACE D1 规格说明书英文版 - 第39页

39 Technical Data Electrical Ratings and Compressed Air Supply Electrical ratings Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version) 3 x 208 VAC ± 5 %; 50/60 Hz (U.S.A. version) 3 x 230 VAC ± 5 %; 50/60 Hz 3 x…

Maximum Quality in Production

The SIPLACE D1 not only

provides market-leading

machine quality; it also guar-

antees maximum product

quality through a combina-

tion of the following features:

100% placement process

control

The SIPLACE D1 has vari-

ous control mechanisms as

standard that guarantee

maximum placement reliabil-

ity. For example, sensors

check whether the compo-

nent was picked up or set

down correctly. The force

measurement also checks

the specified component set-

down forces and compen-

sates for differences in

height during pick-up and

any bumps on the PCB dur-

ing placement.

Digital vision inspection

The digital vision system

guarantees extremely fast

and reliable component rec-

ognition, while being very

simple to use. The system

identifies each individual

component from its shape

and color. Using different illu-

mination and brightness lev-

els, every component shape

can be easily detected. The

system also stores images of

the components, known as

"vision dumps". These show

which components were

rejected. As a result, errors

can be detected earlier when

introducing new products,

thus increasing process reli-

ability. The vision dumps

also provide good negotia-

tion tools if defective compo-

nents are supplied.

Intelligent software for

set-up verification

The SIPLACE D1 set-ups

are verified on the compo-

nent roll with reference to the

barcode scanner. This helps

to avoid set-up errors.

Automatic optical inspec-

tion

Finally, with SIPLACE OS,

the SIPLACE team is offering

an AOI (Automatic Optical

Inspection) device that

checks the products and sig-

nals errors to the placement

machine.

This network of tests consid-

erably lowers dpm rates and

increases the first pass yield.

Quality values for the SIPLACE D1

Pickup rate 99.95%

a) Based on average values from evaluations

Dpm rate 5 dpm

Technical Data

Electrical Ratings and Compressed Air Supply

Electrical ratings

Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)

3 x 208 VAC ± 5 %; 50/60 Hz (U.S.A. version)

3 x 230 VAC ± 5 %; 50/60 Hz

3 x 380 VAC ± 5 %; 50/60 Hz

3 x 400 VAC ± 5 %; 50/60 Hz (European version)

3 x 415 VAC ± 5 %; 50/60 Hz

Fuses 3 x 16 A (3 x 200 VAC / 3 x 208 VAC / 3 x 230 VAC/

3 x 380 VAC / 3 x 400 VAC / 3 x 415 VAC)

Nominal apparent power 2 - 3 kVA

Rated current consumption 3 - 5 A / 3 x 400 VAC

Compressed air supply

Compressed air ratings

min

max

0.55 MPa = 5.5 bar

1.0 MPa = 10 bar

Compressed air connection R 3/4" internal thread (pipe thread) with

1/2" hose connector

Compressed air consumption with 2 tape

cutters and C&P/P&P heads

a) Under normal atmospheric conditions at 20°C and 1013 hPa

345 Nl/min

205 Nl/min with vacuum pump

Operating pressure 0.52 MPa ± 0.01 MPa (5.2 bar ± 0.1 bar)

Compressed air specification

Particle size 5 µm ISO class 3

Particle density 5 mg/m³ ISO class 3

Maximum oil content 0,01 mg/m³ ISO class 1

Pressure dewpoint + 3°C ISO class 4

Technical Data

Electrical Connection, Interfaces and

Compressed Air Connection

Compressed air connectionSMEMA/Siemens interface

PC and LAN connection

Power connector

5 x 4 mm² cable with CEKON plug 5 x 16 A

(3 x 208 VAC / 3 x 230 VAC / 3 x 380 VAC / 3 x 400 VAC / 3 x 415 VAC)

Power supply connection