PSV7000_ Owners Manual_096-0460-001B - 第170页

Maintenance ■ Maintenance Sign-off Chart 4—64 Data I/O • 096-0640-001B back * denotes optional equipment Enter initials and date: Jan.  Fe b. Mar . Apr . May Jun. Monthly • Clean/inspect T ray Fee d er * • Check input a…

■ Maintenance Sign-off Chart ◘ Cleaning and Inspecting the Dual Tray Feeder

PSV7000 Owner’s Manual 4—63

back

Maintenance Sign-off Chart

PSV7000 SN____________

For maintenance instructions see

Maintenance Schedule on page 4-2.

Copy this chart

to use near your

PSV7000 Machine

Enter name of people responsible or daily check marks:

Sunday 

Monday Tuesday

Wednesday

Thursday Friday Saturday

Daily

• Blow off sockets

• Check input air

pressure

Name

Enter initials and date:

Jan.  Feb. Mar. Apr. May Jun.

Weekly

• Run programmer

Self-test, (cycle

power)

• Clean surfaces

• Clean probe tips.

• Check Tray Feeder*

• Clean 3D Inspection

System*

Jul. Aug. Sep. Oct. Nov. Dec.

Jan. Feb. Mar. Apr. May Jun.

Jul. Aug. Sep. Oct. Nov. Dec.

Maintenance ■ Maintenance Sign-off Chart

4—64 Data I/O • 096-0640-001B

back

* denotes optional equipment

Enter initials and date:

Jan.  Feb. Mar. Apr. May Jun.

Monthly

• Clean/inspect Tray

Feeder*

• Check input air fil-

ter; drain fluid

• Check vacuum gen-

erator filters on head

• Clean Laser Rotor

tips and Laser hous-

ing*

Jul. Aug. Sep. Oct. Nov. Dec.

‘Enter initials and date:

Jan.–Feb.–Mar.

Apr.–May–Jun. Jul.–Aug.–Sep. Oct.–Nov.–Dec.

Quarterly

• Clean the Device

Position System win-

dows under PNP head

• Clean safety doors

• Clean the monitor

Initial—

‘Enter initials and date:

Jan.–Jun.

Jul.–Dec.

Semi-Annually

• Check PNP head connec-

tions & fasteners

• Clean Fume extraction

tubes and clean or

replace the filters*

• Clean Handler PC filter

• Clean Laser PC filter*

• Clean 3D Inspection PC

filter*

Initial—

Enter initials and date: .

20___

Annually

• Clean and lube Gantry

guide rails

• Perform Programmer Per-

formance Verification test

• Check vacuum generator

silencers on head

• Inspect the gantry belt ten-

sion

Initial—

PSV7000 Owner’s Manual Glossary—1

Chapter

GlossaryGlossary

This glossary defines terms and acronyms used in

this manual as they relate to the PSV7000

Programmers.

Alphabetical

8P8C ~

8 Position 8 Contact (also 8 position 8 conductor; it is often incorrectly called

RJ45).

Access door ~

Large sheet-steel hinged panels with latches on most sides of the machine. See

also, safety door, and Cabinet panels.

Actuator Plate ~

A plate that opens a socket(s) for loading a device(s).

AH700( ~

The Software for operating PSV7000 Systems. Also, a folder on the C: drive in

Handler computer.

Air regulator ~

a valve which reduces the pressure of the incoming air to a set value.

algorithm ~

A software file containing specific step-by-step calculations required by the pro-

grammer to program a device.

Allen wrench ~

Hex Key, Umbrako key,

APS ~ Annual Programmer Support contract

boot ~

see Start.

bus ~

A set of connections for connecting various functional units in a computer.

Cabinet panel ~

Large sheet-steel sides screwed to the machine frame. See also, Access Doors.

CFM

Cubic Feet per Minute, a volume/time measure of the rate of air flow.

One CFM = 28.32 liters per minute.