PSV7000_ Owners Manual_096-0460-001B - 第171页

PSV7000 Owner’s Manual Glossary—1 Chapter G Glossar y Glossar y This glossary defines terms and acronyms used in this manual as they relate to the PSV7000 Programmers. A Alphabetical 8P8C ~ 8 Position 8 Contact (also 8 p…

Maintenance ■ Maintenance Sign-off Chart

4—64 Data I/O • 096-0640-001B

back

* denotes optional equipment

Enter initials and date:

Jan.  Feb. Mar. Apr. May Jun.

Monthly

• Clean/inspect Tray

Feeder*

• Check input air fil-

ter; drain fluid

• Check vacuum gen-

erator filters on head

• Clean Laser Rotor

tips and Laser hous-

ing*

Jul. Aug. Sep. Oct. Nov. Dec.

‘Enter initials and date:

Jan.–Feb.–Mar.

Apr.–May–Jun. Jul.–Aug.–Sep. Oct.–Nov.–Dec.

Quarterly

• Clean the Device

Position System win-

dows under PNP head

• Clean safety doors

• Clean the monitor

Initial—

‘Enter initials and date:

Jan.–Jun.

Jul.–Dec.

Semi-Annually

• Check PNP head connec-

tions & fasteners

• Clean Fume extraction

tubes and clean or

replace the filters*

• Clean Handler PC filter

• Clean Laser PC filter*

• Clean 3D Inspection PC

filter*

Initial—

Enter initials and date: .

20___

Annually

• Clean and lube Gantry

guide rails

• Perform Programmer Per-

formance Verification test

• Check vacuum generator

silencers on head

• Inspect the gantry belt ten-

sion

Initial—

PSV7000 Owner’s Manual Glossary—1

Chapter

GlossaryGlossary

This glossary defines terms and acronyms used in

this manual as they relate to the PSV7000

Programmers.

Alphabetical

8P8C ~

8 Position 8 Contact (also 8 position 8 conductor; it is often incorrectly called

RJ45).

Access door ~

Large sheet-steel hinged panels with latches on most sides of the machine. See

also, safety door, and Cabinet panels.

Actuator Plate ~

A plate that opens a socket(s) for loading a device(s).

AH700( ~

The Software for operating PSV7000 Systems. Also, a folder on the C: drive in

Handler computer.

Air regulator ~

a valve which reduces the pressure of the incoming air to a set value.

algorithm ~

A software file containing specific step-by-step calculations required by the pro-

grammer to program a device.

Allen wrench ~

Hex Key, Umbrako key,

APS ~ Annual Programmer Support contract

boot ~

see Start.

bus ~

A set of connections for connecting various functional units in a computer.

Cabinet panel ~

Large sheet-steel sides screwed to the machine frame. See also, Access Doors.

CFM

Cubic Feet per Minute, a volume/time measure of the rate of air flow.

One CFM = 28.32 liters per minute.

Glossary—2 Data I/O • 096-0460-001B

back

checksum ~

A computed value which is transmitted or stored along with the data in order to

detect corruption of the data.

chip ~

See Device.

chip feeder ~

A component feeder system which mounts onto, and feeds devices to, electronic

SMT Machines. Also called a tape feeder.

contacts

The electrically conductive metal leads on a socket module which conduct pro-

gramming signals from the programmer to the pins on the device in the socket.

continuity check

A preprogramming test that checks the device for electrical connections to the

socket. (No electrical connection to the die). Not all pins are checked during this

test.

DAB ~

See Diagnostic Adapter Board

device ~

A programmable integrated circuit. You may have heard other terms such as

chip, microchip, semiconductor device, PROM, or DUT (Device Under Test).

device package ~

The protective container or housing for an electronic device with external termi-

nals to provide electrical access to the components inside.

device tape ~

The device pocket tape, the devices, and the cover tape before they are sepa-

rated.

Device-position

Sensor

Also called, ‘Laser guided Device-position Sensor.’ The laser optic sensor under

the PNP head that measures the device position on each probe.

Diagnostic Adaptor

Board

(DAB) A circuit board that replaces the Socket Adapter Board for performing pro-

grammer hardware diagnostics.

Digital I/O ~

Provides 24 VDC for sensor systems throughout the PSV7000 System.

Door ~

See Access Doors.

Dual Tray Feeder ~

An optional automatic tray feeder by Data I/O that mounts onto the PSV7000 to

deliver trays to the workspace.

Enable selector

The switch on the Laser PC just above the Key selector.

E-plate 1 ~

A vertical plate that supports the DC Distribution PCB and power supply and gen-

erally supplies services to the programmers.

E-plate 2 ~

A vertical plate inside the back of the machine that distribute AC and DC power.

End a job ~

See Finish a job.

ESD ~

Electrostatic Discharge. ESD can damage programmable devices and other

static sensitive electronic components.

E-Stop ~

Same as Emergency Stop. Stops machine motion immediately. Intended to pre-

vent injury in an emergency situation.

Ethernet ~

The most popular type of local area network, which sends its communications

through radio frequency signals carried by a coaxial cable. Software protocols

used by Ethernet systems vary, but include Novell Netware and TCP/IP.