PSV7000_ Owners Manual_096-0460-001B - 第33页
■ Software ◘ Laser Software PSV7000 Owner’s Manual 1—19 back T o switch between the Laser compute r and the Handler computers: 1. On the keyboard, press Scroll Lock twice and then number 2 (or use the Up Arrow or Down Ar…
Introduction ■ Software
1—18 Data I/O • 096-0460-001B
back
AH700 Application
Data I/O’s Automated Handler software is a Microsoft
®
Win-
dows
®
-based application for setting up and programming integrated
circuits (devices) on PSV7000 Systems. It offers a selection of many
PSV7000 System options such as input/output configurations,
labeling options, and statistical feedback methods. The AH700
resides in the Handler Computer.
For updates to AH700 Software see Software and Firmware on our
web site under the SUPPORT tab. Then look for PSV7000 under
Download the Latest Firmware.
Figure 1-12: AH700 Start-up window.
Laser Software
The Laser software is a Windows
®
-based application that allows cre-
ating parameters required for laser marking jobs as well as initiating
laser marking. This Lighter Laser Editor software is on the Handler
computer.
Note: The touch screen does not work while in Laser Computer
mode.
When the Laser Marking System is set up and initialized, it receives
commands from the AH700 which starts the marking sequence.
Switching Between Computers
PSV7000 has a separate computer for the Laser software.
The presence of some
features are deter-
mined by the
winAH400.ini file.
For more information
about the Laser Sys-
tem, see Setting Up the
Laser Marking Module
on page 2-29 and
(Optional) Creating a
Laser Marking File on
page 3-24.
■ Software ◘ Laser Software
PSV7000 Owner’s Manual 1—19
back
To switch between the Laser computer and the Handler computers:
1. On the keyboard, press Scroll Lock twice and then number 2 (or
use the Up Arrow or Down Arrow key).
2. Start the Lighter Engine software.
Note: To switch back to the Handler computer, press Scroll Lock
twice and then number 1.
Introduction ■ Laser Safety
1—20 Data I/O • 096-0460-001B
back
Laser Safety
The PSV7000 Laser option is designed in accordance with the fol-
lowing safety guidelines:
• A fume extractor traps marking fumes and other by-products of
the laser marking operation.
• The system designed to comply with Complies with ANSI, IEC,
and CDRH guarding standards.
• Refer to and follow laser and safety precautions in ANSI
Z136.1 - 2007, American National Standard for the Safe Use of
Lasers. Procedures listed under the Standard include: appoint-
ment of a Laser Safety Officer, operation of the product in an
area of limited access by trained personnel, servicing of the
equipment only by trained and authorized personnel, and post-
ing of signs warning of potential hazards.
WARNING: Possible eye and skin injury! The laser will fire even
when safety doors are open. If equipped with Laser Marking, do
NOT interfere with, or work on, the Laser Module while the Laser
PC is ON and the Laser Enable selector is ON.