PSV7000_ Owners Manual_096-0460-001B - 第39页
PSV7000 Owner’s Manual 2—1 Chapter 2 2 Setup This chapter covers setting up the PSV7000 machine as well as setting up equipment on the machine. This includes optional equipment such as the Tape Output equipment, as well …
Introduction ■ Room Considerations
1—24 Data I/O • 096-0460-001B
back
PSV7000 Owner’s Manual 2—1
Chapter
2
2Setup
This chapter covers setting up the PSV7000 machine
as well as setting up equipment on the machine.
This includes optional equipment such as the Tape
Output equipment, as well as the various device
media choices for running jobs, such as setting up
Static Trays or an Automatic Tray Feeder.
Machine Installation
Installation of the PSV7000 is performed by Data I/O service per-
sonnel or an authorized distributor. After the PSV7000 arrives, ensure
that there is no damage to the exterior of the crate. Remove the
PSV7000 Machine from the crate and inspect for damage that may
have occurred during shipping. If no damage is evident, unbolt the
machine from the shipping pallet.
For the intended area for PSV7000 installation see Room Considerations
on page 1-21.
Setup ■ Machine Installation
2—2 Data I/O • 096-0460-001B
back
Leveling
When the PSV7000 is at the desired location, adjust the feet to level it.
WARNING: Possible machine damage or personal injury!
Instability such as vibrating, walking, or rocking, may occur if
fewer than four of the installed feet make suitable contact
with the floor, or if the leg locknuts are not tightened against
the frame.
Only the adjustable feet provided on the PSV7000 Machine
should be used for leveling. Do not use shims to assist in level-
ing.