PSV7000_ Owners Manual_096-0460-001B - 第68页

Setup ■ Setting Up the Laser Marking Module 2—30 Data I/O • 096-0460-001B back 5. Save the winAH400.ini file and exit W indows Explorer . Note: If you have other options such as Serialization, contact Data I/O Customer S…

■ Setting Up the Laser Marking Module ◘ Setting Up the Tape Output System

PSV7000 Owner’s Manual 2—29

back

Setting Up the Laser Marking

Module

A PSV7000 System that is ordered with a Laser Marking Module

requires no additional set up at your site. All software is installed and

all mechanical connections are complete—the Laser Module is ready

to use, although different size device tips may be needed for your

particular job. For replacing the Laser rotor tips, see the PSV7000

Operator’s Manual.

Your job file, created in TaskLink, determines whether or not devices

get marked.

Note: To use the Laser Marking Module, a laser marking file must

first be created and added to a job file. For more information, see

(Optional) Creating a Laser Marking File on page 3-24.

CAUTION: File corruption hazard! Before making any changes to

your winAH400.ini file, save a backup copy.

If, for some reason, your winAH400.ini file requires changes, you can

edit it to accommodate the Laser Marking Module as follows:

Edit the winAH400.ini file for Laser Marking—

1. Using Windows Explorer, locate

C:\AH700\winAH400.ini

and m

ake a backup copy, for example,

winAH400backup.ini

2. Open the original file with Microsoft Notepad.

Locate the heading:

;------- Marking System Selection -----

3. There may be a list of marking system names. Remove the semi-

colon from the Laser System corresponding to the one installed

on your PSV7000 System. Only one line should be without a

semicolon.

;If no marking system, remove ; from next line

;MarkerSystem=NONE

;Possible Marking Systems are...

MarkerSystem=AREX

4. Locate the heading:

;----- Laser System Definitions & Options ------

and set this line as follows;

LaserRemoteConnection=ETHERNET 192.168.2.1

If you have previously

used a Marking System,

you may already have

saved a winAH400.ini

file (with a modified

name) specifically for

that marking system

setup.

For more ini file infor-

mation, see the

on-screen Help.

Setup ■ Setting Up the Laser Marking Module

2—30 Data I/O • 096-0460-001B

back

5. Save the

winAH400.ini

file and exit Windows Explorer.

Note: If you have other options such as Serialization, contact

Data I/O Customer Support or a local Data I/O approved service

representative.

■ Setting Up the Label Printing System ◘ Setting Up the Tape Output System

PSV7000 Owner’s Manual 2—31

back

Setting Up the Label Printing

System

If your PSV7000 System has the optional Label Printing System for

printing reel labels, it was installed by Data I/O. If you need to

remove, repair, or reinstall your Label Printer, refer to the Label

Printer Manual that came with your PSV7000 System. For questions

and service, contact Data I/O Customer Support or a local Data I/O

approved service representative.