PSV7000_ Owners Manual_096-0460-001B - 第81页
■ Administrator Functions ◘ Optimize Movetimes PSV7000 Owner’s Manual 3—11 back . Figure 3-3: Error messages don’ t display until y ou click the red Error pop-up butt on to open the Alarm dialog. 1c. W rite down the axis…
Administrative Functions ■ Administrator Functions
3—10 Data I/O • 096-0460-001B
back
To teach locations
1. Run the job in TaskLink that uses your new (renamed) Package
File.
1a. Select a Task and click Run.
1b. In the AH700 Application, click Start.
1c. At the Setup window, make setup selections.
1d. Click System > Gantry. A password may be required—refer
to Creating Security Profiles on page 3-6.
2. To continue, see the AH700 on-screen Help (Teaching Locations >
Printable list of the steps). It covers teaching workspace locations
for all media options.
Note: The PSV7000 System can have static trays or a Data I/O
Dual Tray Feeder. Teaching tray locations is the same for both.
Figure 3-2: Run window shown with a Data I/O Dual Tray Feeder
(crosshatch).
Errors
Axis Limit Error
During the process of teaching locations you will be directing the
PNP head to move to various locations inside the work envelope. If
the PNP head is directed to move beyond its X-axis or Y-axis limits,
you will see a red error button.
To resolve axis limit errors:
1. Record the error message—
1a. Note what item was being taught when the error appeared,
such as Programmer 5 or Tray 1 or Tube 2.
1b. Click the Error button to display the error message.
■ Administrator Functions ◘ Optimize Movetimes
PSV7000 Owner’s Manual 3—11
back
.
Figure 3-3: Error messages don’t display until you click the red Error
pop-up button to open the Alarm dialog.
1c. Write down the axis (in this case, Y-axis), whether the mini-
mum or maximum position has been exceeded (in this case,
the minimum position), and the “Tried” and “Limit” values
(in this case, Tried = 2.982 and Limit = 3).
1d. Click OK.
2. Contact Data I/O Service or your nearest authorized representa-
tive.
3. The item that was being taught when the error occurred (tray,
programmer, reject bin, etc.) needs to be re-taught. See Teaching
the Package File in the AH700 Help.
Optimize Movetimes
After the equipment locations are taught, you can optimize the move-
ment of the PNP head in the work envelope. This command (Get
Movetimes) calculates programming times versus head travel time to
decide the best PNP head path, especially effective when some pro-
grammers are not used.
To get movetimes:
1. On the Gantry window, click Get Movetimes.
For contact
information see
Contacting Data I/O
on page ix.
Administrative Functions ■ Administrator Functions
3—12 Data I/O • 096-0460-001B
back
Figure 3-4: Click Get Movetimes to optimize head travel.
2. Click Yes when prompted to save positions.
Monitoring Statistics
Occasionally, the system administrator may require statistics for a
group of devices for a given job. This is easily accomplished using
any of three statistics tools described on the next pages:
• TaskLink’s Session Data Logging feature
• the AH700 Statistics window
• (optional) Statistical Process Control Software (customer-sup-
plied)
• Sort-on-Error-Code separates devices that fail specific, customer
specified processes.
In addition, Data I/O offers additional utilities for enhancing yield
and reducing errors. These include the Automotive Performance Pak
(see page 3-34) and several other software packages and hardware
such as Factory Integration Software (FIS) and Serial Number Server
(SNS).
For turning ON
Sort-On-Error-Code in
the winAH400.ini file, see
the AH700 on-screen
Help.
For setting up
Sort-On-Error-Code see
TaskLink Help for
PSV7000.