PSV7000_ Owners Manual_096-0460-001B - 第86页

Administrative Functions ■ Administrator Functions 3—16 Data I/O • 096-0460-001B back 2. Locate the section for SPC Logging. It will look like this: [SPC Logging] LoggingEnabled=FALSE MaxFileSize=10485760 TempLogFile=C:\…

100%1 / 186
■ Administrator Functions ◘ Monitoring Statistics
PSV7000 Owner’s Manual 3—15
back
To reset Package statistics:
1. Select Package Statistics in the drop-down field in the upper left
corner.
2. Click Reset in the right-most column corresponding to the Flash-
CORE programmer on which the Socket Adapter was replaced.
• If a Socket Adapter was replaced, reset all rows for that pro-
grammer.
• If an individual socket was replaced*, reset only the row corre-
sponding to the replaced socket.
The R-date (reset date) is set to the current date and statistics are
all reset to zero.
Figure 3-8: Resetting Package statistics. Open the Statistics window
from either the Setup window or the Run window.
Statistical Process Control Software
The AH700 can be set to generate a semicolon-delimited file whose
fields are described on the next page. A (customer-supplied) Statis-
tical Control SW can be used to import and process data output by
the AH700. Or use Data I/O’s Enhanced Statistical Software that
comes with the A
H700; see page 3-34
.
CAUTION: File corruption hazard! Before making any changes to
your winAH400.ini file, save a backup copy.
To generate a semicolon-delimited output file:
1. On the Handler Computer, navigate to C:\AH700 and open
winAH400.ini (with Microsoft® Notepad or IDM Computer
Solutions’s UltraEdit®).
*Only HIC Socket
Adapters and HPS
Socket Adapters are
designed to accommo-
date replacement of
individual sockets on
the adapter board.
Administrative Functions ■ Administrator Functions
3—16 Data I/O • 096-0460-001B
back
2. Locate the section for SPC Logging. It will look like this:
[SPC Logging]
LoggingEnabled=FALSE
MaxFileSize=10485760
TempLogFile=C:\spcout.txt
3. Set the second line (LoggingEnabled) to TRUE.
4. (Optional) Edit the location of the output file at the line
“TempLogFile=...” entering the drive and path desired.
5. Save and close winAH400.ini.
Note: In the above example the SPC logging file is saved to
C:\
directory. It can, however, be saved elsewhere on the Handler Com-
puter hard drive, or on a networked drive if network connected.
The SPCOut.txt file contains semicolon-delimited fields. A partial list
follows:
The SPCOut.txt Field Descriptions
01 DevicesInputsystem - number of devices picked from Input
media
02 DevicesInspected - number of devices inspected by Vision system
03 InspectionQuality* - as percentage, compared with reference
vision
04 InspectionYield
05 DevicesInsertedSocket - number of devices inserted into socket
06 SocketYield
07 ProgrammerYield
08 ProgSysYield - Yield of all programmers together
09 DevicesProcessedMarker
10 MarkingYield
11 SystemThroughputExcWait - starts with first device placed,
excludes wait times.
12 SystemTotalThroughputIncWait - starts when Run starts,
includes wait times
13 SystemYield
14 AreaID - Programmer #1 = “17”, Programmer #2 = “18”, …, Pro-
grammer #24 = “40”)
15 PosID - that is Socket #
16 TimeStamp - Date/Time of SPC log entry
17 OrderNumber - Job Name and or number
■ Administrator Functions ◘ Monitoring Statistics
PSV7000 Owner’s Manual 3—17
back
If the Automotive Performance Pak is installed, an extended SPC log
file (with APP enabled) would have the following delimited fields:
18 Package - A Package File used for the job
TimeStamp
JobName
JobDescription
Device
Package
VisionPRJ
RecordID
SystemStatus
SystemMSG
FromAreaID
FromPosID
DeviceStatus
WhichCup
SNused
ToAreaID
ToPosID
DevicesInspected
InspectionPassed
InspectionQuality
DevicesInserted-
Socket
SocketYield
ProgrammerYield
ProgSysYield
The SPCOut.txt Field Descriptions