PSV7000_ Owners Manual_096-0460-001B - 第9页
• Using This Manual •• Symbols for Specific Models & Options PSV7000 Owner’s Manual vii back S ymbols for Specific Models & Options The following symbols appear in the side bar next to paragraphs or procedural st…
Preface • Using This Manual
vi Data I/O • 096-0460-001B
back
CAUTION: A caution message like this has black text and calls
your attention to potentially hazardous situations and practices
that might damage equipment.
The potential loss is not as serious
as a warning.
Safety Symbols
Safety symbols in this manual mean this:
Definition of a Caution.
—Crush Point (Pinch Point) Warning
— Crush (punto de pellizco) ADVERTENCIA
— Crush (Prise Punkt) Warnung
—Electric Shock Warning
— ADVERTENCIA de descarga eléctrica
— Elektroschock Warnung
—General Hazard Warning
— ADVERTENCIA de peligro general
— General Hazard Warning
—Noise Warning; may be over 80 db
— ADVERTENCIA de ruido; puede ser más de 80 decibeles
— Lärm-Warnung; möglicherweise mehr als 80 Dezibel
—Eye Hazard Warning
— ADVERTENCIA de peligro del ojo
— Auge Hazard Warning
—Collision Warning
— ADVERTENCIA de colisión
— Collision Warning
—Laser Hazard Warning
— ADVERTENCIA de peligro del laser
— Laser-Hazard Warning
—Compressed Air Warning
— ADVERTENCIA de aire comprimido
— Druckluft-Warnung
—Electrostatic Discharge Warning (ESD)
— ADVERTENCIA de descarga electrostática
— Elektrostatische Entladung Warnung
• Using This Manual •• Symbols for Specific Models & Options
PSV7000 Owner’s Manual vii
back
Symbols for Specific Models & Options
The following symbols appear in the side bar next to paragraphs or
procedural steps that are limited to a specific model or piece of
optional equipment. If the symbol is next to a heading, the entire con-
tent under that heading is limited to the equipment indicated.
. . . adjacent information is limited to this optional
equipment:
3D Lead Inspection System
Only Tape Output Systems
Data I/O Auto-Tray Feeder
Fiber Laser Marking System.
Vibratory Tube Feeder System
This symbol
means . . .
Preface • Precautions for Safe Operation
viii Data I/O • 096-0460-001B
back
Precautions for Safe Operation
PSV7000 has many safety features designed to make the system safe
and efficient to operate. The system can be dangerous if the safety
precautions and features are ignored.
Precaution List
To avoid possible personal injury or damage to the equipment,
observe the following practices:
General Precautions
Do not use the PSV7000 System for any purpose other than its
intended use.
Personal injury could be caused from high leakage electrical
current from the main power cable. An Earth (ground) connec-
tion is essential before connecting power.
Do not operate the system if the safety doors and shields are not
in their normal operating positions.
Do not operate the system when any of the cabinet panels (sheet
metal) are removed.
Do not operate the PSV7000 System unless you have been thor-
oughly trained and have read and understand the instructions
in this manual (or the Operator’s Manual), particularly those
that describe the system’s safety features (Safety Systems on page
1-4).
Do not disable or attempt to defeat any of the safety features of
this system. Serious personal injury and equipment damage can
occur if any safety systems are disabled. If you suspect that a
safety feature of the system is damaged or malfunctioning, stop
using the PSV7000 immediately and contact your local Data I/O
Support representative.
Do not place any part of your body near moving machine parts.
If manually moving the gantry or PNP head, only push or pull
on the triangular bracket on the left side of the head and only
after the AH700 Application is closed.
Repair Precautions
Only qualified personnel trained by Data I/O should install,
maintain, repair, or troubleshoot the PSV7000 Systems.
Do not operate a system while servicing, replacing, or adjusting
any component unless directed to do so in this manual. Make
sure that the system is properly shut down before servicing,
replacing components, or adjusting components.
Disconnect the external air before servicing pneumatic parts.
WARNING:
Pinch hazard.
The E-Stop
does not turn
off air. Socket
Actuators can
still move
down when
an E-Stop is
pushed— and
even when
Safety doors,
are open.
Use caution.