PSV7000_ Owners Manual_096-0460-001B - 第94页
Administrative Functions ■ Marking Options 3—24 Data I/O • 096-0460-001B back Marking Options A laser Laser Module is an opti on which marks the surface of the devices. It has a separate Operat ion Manual which came with…
■ (Optional) Creating a Data File from a Master Device ◘ Process Errors
PSV7000 Owner’s Manual 3—23
back
(Optional) Creating a Data File from
a Master Device
The PSV7000 System can read data from a master device and create a
data file (also called a PC File) that can then be used in programming
jobs.
For complete instructions on creating a data file from a master device,
see TaskLink online Help.
Figure 3-10: TaskLink’s online Help includes steps for creating a
computer file from a master device.
Administrative Functions ■ Marking Options
3—24 Data I/O • 096-0460-001B
back
Marking Options
A laser Laser Module is an option which marks the surface of the
devices. It has a separate Operation Manual which came with your
PSV7000 System if it has the option.
Figure 3-11: Manual for the laser device marker.
(Optional) Creating a Laser Marking File
Laser graphics used to mark devices are generated using the Lighter
Editor software included with the Laser Option. It resides in the
Laser Computer. Any style of marking (whether text-based,
graphic-based, or both) can be generated and used for marking
devices. The only limitation is the size of the device to be marked.
For instructions creating an image file for the Laser System, see the
AH700 on-screen Help topic Setting up and Teaching > Create a Laser
Marking File.
Laser
■ Marking Options ◘ (Optional) Creating a Laser Marking File
PSV7000 Owner’s Manual 3—25
back
Verifying Proper Laser Operation
WARNING: Possible health hazard from toxic fumes! Laser mark-
ing generates vapors, fumes, and particles that can be noxious,
toxic, or even fatal. Follow maintenance procedures. Use proper
ventilation.
Requirements
• An image file is in the Lighter Editor SW application.
To verify that the laser is marking as expected:
1. At the Run window, click RunOne.
Only one device will be processed.
2. Verify that the marking graphic placement on the device is as
desired. If not, adjust the laser file in the Lighter application or
see the next heading on troubleshooting.
Aligning Laser Marking
Requirements
•Two people
• An image file is in the Lighter Editor SW application.
If the device is not marked, check that the laser is aimed at the device
correctly:
1. Stop any job that is running by clicking Finish on the Run win-
dow.
2. Turn the Laser PC Enable Selector OFF. (The Key Selector should
be ON.)
WARNING: Serious injury hazard to eyes and skin! Do not open
or work on the Laser Module when the Enable Selector is in the
ON position. Always make sure it is OFF. The two lamps on the
back of the Laser Module must be green.