00193411-02 - 第134页
6 Component handling User Manual SIPLACE HS-60 6.2 Technical data f or the feeders Software v ersion SR.503.xx 07/2003 US Edition 134 6.2.6 12 mm S feeder for ca pa citors based on powdered met al, model E 6 Fig. 6.2 - 6…
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.2 Technical data for the feeders
133
6.2.5 12 mm S feeder for capacitors based on powdered metal, model C/D
6
Fig. 6.2 - 5 12 mm S feeder for capacitors based on powdered metal, model C/D
6
Item no. 00141118-xx 6
Width 30.6 mm 6
Tracks per feeder 1 6
Assigned locations 1 6
Maximum number of feeders 4 x 12 6
Stock of components for 7" reels approx. 4000 6
Maximum tape height 3.6 mm 6
Transport distance (variable) 4mm, 8mm, 12mm, 16mm 6
NOTE: 6
Using this feeder type you can adjust the height of the tape support at the pick-up position. 6
WARNING 6
Use only feeders, labeled as shown above, when
feeding capacitors based on metal-powder (e.g.
tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
6 Component handling User Manual SIPLACE HS-60
6.2 Technical data for the feeders Software version SR.503.xx 07/2003 US Edition
134
6.2.6 12 mm S feeder for capacitors based on powdered metal, model E
6
Fig. 6.2 - 6 12 mm S feeder for capacitors based on powdered metal, model E
6
Item no. 00141117-xx 6
Width 30.6 mm 6
Tracks per feeder 1 6
Assigned locations 1 6
Maximum number of feeders 4 x 12 6
Stock of components for 7" reels approx. 4000 6
Maximum tape height 3.6 mm 6
Transport distance (variable) 4mm, 8mm, 12mm, 16mm 6
WARNING 6
Use only feeders, labeled as shown above, when
feeding capacitors based on metal-powder (e.g.
tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.2 Technical data for the feeders
135
6.2.7 24/32 mm S feeder
6
Fig. 6.2 - 7 24/32 mm S feeder
Item no. 00141093-xx 6
Wide 42.4 mm 6
Tracks per feeder 1 6
Assigned locations 1.5 6
Maximum number of feeders 4 x 8 6
Stock of components for 7" reels approx. 2000 6
Transport distance (variable) 4 to 40 mm, (in 4 mm increments) 6