00193411-02 - 第139页
User Manual SIPLAC E HS-60 6 Component han dling Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley 139 6.4 Component trolley 6.4.1 Structure The com ponent tr olley cons ists esse ntially of a chassi s,…
6 Component handling User Manual SIPLACE HS-60
6.3 Setting up the feeders Software version SR.503.xx 07/2003 US Edition
138
6
Fig. 6.3 - 1 Inserting 30 or 45 mm wide feeders on the component feeder table
6
(1) Feeder, 30 mm wide
(2) Feeder, 45 mm wide
(3) Feeder, 30 mm wide
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley
139
6.4 Component trolley
6.4.1 Structure
The component trolley consists essentially of a chassis, a component feeder table on which the
feeder is mounted, a communication unit, a tape reel container and a waste container.
6
Fig. 6.4 - 1 Component trolley
(1) Component trolley
(2) Communication unit
(3) Component feeder table
(4) Handle for locking and lowering the component feeder table
(5) Tape container
(6) Waste tape container
NOTE ON OPERATIONAL SAFETY
All component trolleys or matrix tray changers must be docked on the machine in order to oper-
ate it. If they are not, the machine stays in EMERGENCY STOP status. The placement process
is interrupted.
Docking and undocking the component trolley are described in Section 5.9
, page 120 onwards.
6 Component handling User Manual SIPLACE HS-60
6.4 Component trolley Software version SR.503.xx 07/2003 US Edition
140
6.4.2 Tape container
Reels up to 15" in diameter may be used. However, you should use spindles for 15" reels. Insert
the spindles into the dividing plates as shown in Fig. 6.4 - 2
.
PLEASE NOTE 6
We recommend that you use spindles if the tape reel diameter exceeds 5". This will ensure that
the feeders operate reliably.
6
Fig. 6.4 - 2 Component trolley with tape container
6
(1) Component trolley
(2) Spindles
(3) Dividing plate
(4) Tape container