00193411-02 - 第144页
6 Component handling User Manual SIPLACE HS-60 6.5 Used tape c utter Software version SR.503.xx 07/2003 US E dition 144 6.5 Used t ape cutter 6 Fig. 6.5 - 1 Position of the used t ape cutter 6 (1) Used tape cutt er (2) U…
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.4 Component trolley
143
6.4.5 Support for the middle tape reel for 3 x 8 mm feeders
Type 3 x 8 mm S feeders transport components to the pick-up position on three tracks. The tape
reels for the two outer tracks are located between the dividing plates in the tape container. The
middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1) and
– 1 tape reel holder (item 2) for every two feeders
The adapter plate is fixed to the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
Fig. 6.4 - 4 Support for the middle tape reel for 3 x 8 mm feeders
6
(1) Adapter plate
(2) Tape reel holder
6 Component handling User Manual SIPLACE HS-60
6.5 Used tape cutter Software version SR.503.xx 07/2003 US Edition
144
6.5 Used tape cutter
6
Fig. 6.5 - 1 Position of the used tape cutter
6
(1) Used tape cutter
(2) Used tape channel
User Manual SIPLACE HS-60 6 Component handling
Software version SR.503.xx 07/2003 US Edition 6.5 Used tape cutter
145
6.5.1 General
The placement system has a used tape cutter at each of the four component trolley locations. It
is used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component trolley.
Æ Empty the waste tape container every day.
6
Fig. 6.5 - 2 Used tape cutter
6
(1) Tape cutter, pneumatic
(2) Short stroke cylinder
(3) Slot for used tape removal