00193411-02 - 第20页
1 Introduction User Manual SIPLACE HS-60 1.7 Abbreviations Software v ersion SR.503.xx 07/2003 US Edition 20
User Manual SIPLACE HS-60 1 Introduction
Software version SR.503.xx 07/2003 US Edition 1.7 Abbreviations
19
1.7 Abbreviations
1
1
C&P 1 Collect&Place 1
C&P12 1 Collect&Place head with 12 segments 1
CO 1 Component 1
DCA 1 Direct Chip Attach 1
FC 1 Flip chip 1
GND 1 Ground 1
IC 1 Integrated circuit 1
P&P 1 Pick&Place 1
PCB 1 Printed circuit board 1
1 Introduction User Manual SIPLACE HS-60
1.7 Abbreviations Software version SR.503.xx 07/2003 US Edition
20
User Manual SIPLACE HS-60 2 Operational safety
Software version SR.503.xx 07/2003 US Edition 2.1 Safety instructions
21
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This User Manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
DANGER or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment will occur if the danger instructions are not followed.
2
WARNING or
as used in this User Manual means that death, severe injury or considerable damage to equip-
ment may occur if the warning instructions are not followed.
2
CAUTION or
as used in this User Manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
NOTE
as used in this User Manual provides information on the product or indicates a part of the User
Manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of automatic placement systems and add-on devices and
are suitably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify elec-
trical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.