00193411-02 - 第83页

User Manual SIPLAC E HS-60 3 Technical data Software version SR.503.xx 07/2003 US Edition 3.6 Overview of the modules - controls 83 3.6.2 Descri ption All the c ontrols can be r eached b y a 1.60 m tall perso n. Main swi…

100%1 / 198
3 Technical data User Manual SIPLACE HS-60
3.6 Overview of the modules - controls Software version SR.503.xx 07/2003 US Edition
82
3.6 Overview of the modules - controls
3.6.1 Controls
3
Fig. 3.6 - 1 Overview of the modules - controls
3
(1) Operator panel, on the left (7) Component counter
(2) Main power switch (8) LCD touchscreen
(3) Key-operated switch (9) Keyboard with trackball
(4) Stop button (black) (10) Operator panel, on the right
(5) Start button (white) (11) Emergency stop button
(6) Component barcode reader (option) (12) Indicator lamps
User Manual SIPLACE HS-60 3 Technical data
Software version SR.503.xx 07/2003 US Edition 3.6 Overview of the modules - controls
83
3.6.2 Description
All the controls can be reached by a 1.60 m tall person.
Main switch 3
The main power switch is used to switch the power supply to the placement machine on and off.
RISK OF DEATH
Some parts inside the placement system carry potentially lethal voltages - even when switched
off at the main switch. 3
Key switch 3
In normal mode, the key switch is set to "0". The key should be removed and kept in a safe place.
It must only be turned to position "I" (set-up mode) by authorized personnel, and then only for cer-
tain maintenance and servicing work.
Stop button 3
This button is used to stop the placement machine.
Start button 3
This button starts the placement machine after it has been switched on or after faults have been
eliminated.
Emergency stop button 3
The emergency stop button latches in the ON position when pressed. The power supply to the
gantry axes, the components changeover tables, conveyors, and used tape cutters is interrupted
and the voltage supplied to the star axes of the placement heads is reduced. Turn the button to
release it.
Component counter 3
The component counter displays the number of components processed.
LCD touchscreen 3
There is a flat LCD screen with a touch-sensitive surface (touch-screen) on either side of the
placement system. The screen resolution is 1024 x 768 pixels.
3 Technical data User Manual SIPLACE HS-60
3.6 Overview of the modules - controls Software version SR.503.xx 07/2003 US Edition
84
Keyboard 3
A keyboard with the trackball is located beneath each screen.
Indicator lamps 3
The sequence of colors is white - green - white. These lamps are used to signal operating statuses
and malfunctions of the placement machine.
Component barcode reader 3
There is a compartment for the Datalogic DL 910 component barcode reader between the monitor
and keyboard on each side of the machine. The barcode reader enables the components to be
set up and topped up quickly and reliably.
3.6.3 Ergonomic arrangement of the controls
Figure 3.6 - 1 on page 82 provides an overview of the position of the controls. They are subdivided
into the following groups:
Operator panel on the right-hand side of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Start button
– Component barcode reader
Operator panel on the left-hand side of the center console with 3
– LCD touchscreen
– Keyboard with trackball
– Component counter
– Start button
– Stop button
– Key-operated switch
– Component barcode reader
– Main power switch
Input / output side of the PCB conveyor with 3
– EMERGENCY-STOP buttons