M20_Ope_E - 第11页
Name Application Main constituents Polythene buckle 16mm PP band fastening stopper Polyprophylene (PP) SUNDRY (dessicant) Dessicant for moisture absorption, rust prevention, and condensation prevention during shipping Ca…
Safety Interlock
The front and rear covers of the mounter have an interlock mechanism. If either of the covers is
opened during operation, this mechanism is activated to immediately stop the mounter
operation. (Chapter 10 > Stopping a Job Run)
Environmental conditions
Use the mounter within the following conditions:
[Environmental conditions]
・Ambient temperature: Accuracy guaranteed at 23±2°C
・Ambient temperature: Functions guaranteed at 10 to 35°C
(Average temperature for 24 hours or more must be 30°C or less.)
・Relative humidity : 20 to 90%RH (no condensation)
・Elevation : Within 1000 meters above sea level
・Air: Shall contain no dust, particles, corrosive gases, etc.
The mounter is not designed for use in home or commercial business environments.
The maximum noise level during production is 76.6dB.
[Warning]
At high acoustic noise ranges (80dB or more) the machine operators should use ear protective
gear to prevent hearing impairment.
The XiO board uses a lithium battery.
Expected service life is 8 years (in a usage environment of 23°C.
If the battery dies the date and time appearing on the desktop are reset.
Our serviceman will replace the lithium battery on the XiO board, so contact us or our sales
representative if needed.
If disposing of the lithium batteries yourself, do not place them among incombustible
(non-flammable) items for disposal.
Cover the terminals (+ and -) on the lithium battery with tape to insulate them and dispose or
recycle them in compliance with legal statutes, regulations and environmental restrictions in
the country where used.
Shorting the lithium battery terminals (+ and -) together may cause the battery to heat up,
rupture or emit sparks.
When exporting the mounter overseas, we use the following types of packing materials.
If disposing or recycling the packing materials, do so while complying with legal statutes,
regulations and environmental restrictions in the country where used.
Constituents of various packing materials are shown in the table below.
Name Application Main constituents
Barrier Star
(transparent barrier)
Packing material for
moisture-proofing
and rust prevention
during shipping
Polyethylene terephthalate (PET)
(polyester)
Polyethylene (PE)
Cross: Polyethylene (PE)
LL film: Ethylene・Single butene
copolymer
HiPLE-ACE Corrugated
fiberboard for outer
packing
Paper (cellulose fiber aggregate)
Starch paste
Dikkuesuter band Fastener band for
corrugated fiberboard
for outer packing
Polyethylene terephthalate (PET)
polyester
Pigments : approximately 0.2%
Carbon black : approximately 0.2%
Dick PP band Lightweight fastener
band (monitor, parts)
Polyprophylene (PP)
Calcium carbonate : 3%
Pigments : approximately 0.2%
Carbon black : approximately 0.4%
Name Application Main constituents
Polythene buckle
16mm
PP band fastening
stopper
Polyprophylene (PP)
SUNDRY (dessicant) Dessicant for
moisture absorption,
rust prevention, and
condensation
prevention during
shipping
Calcium chloride
Non-woven fabric
Shockwatch (label
type)
Shock detection
during shipping
Paper coated with acrylic adhesive
Clip: polystyrene (PS)
Paper liner
Glass tube
Tilt sensor Detector for
inclination, toppling
and dropping during
shipping,
Surface film: polyprophylene (PP) +
rubber adhesive
Printing display (ink): pigments +
synthetic resins
Board (surface paper): pulp
Board (base material): cellulose
Bluebeads (detection agent/contents):
microbead silica gel 3A
Detection agent colorant: food red
(pigment) (Blue No. 1)
Lockpin (metal stopper) stainless steel
(SUS301)
Surface tape: polyester + acrylic adhesive
Stretch film Grime prevention
during shipping,
dust-proof packing
material
Polyethylene (PE)
Bubble cushioning
(air mat)
Cushioning material
during shipping
Polyethylene (PE)
Evaporable
rust-prevention paper
Anti-rust agent
during shipping
Craft paper
Volatile corrosion inhibitor
Fastening band
(Insulock)
Clamping band for
moving parts during
shipping
Nylon 66 (PA66)
Others
We are releasing several kinds of information about our products on our Service web-site. We
recommend you to access to the web-site periodically in order to get the latest information at
any time.
URL:http://www.yamaha-motor.co.jp
Contents of this manual are subject to change without prior notice.
---Blank page---