M20_Ope_E - 第337页
Chapter 10 Replenishing Com ponents and Using Maintenance Menus 10-33 10-6 Maintenance Notice The Maintenance Notice reminds you to do necessa ry maintenance at fixed time inter vals. The parts which need lubrication, cl…
Chapter 10 Replenishing Components and Using Maintenance Menus
10-32
10-5-7 Conveyor Test
Menu: Manual>Maintenance>ConveyorTest
Here is to check conveyor operation.
This menu is not used usually.
Chapter 10 Replenishing Components and Using Maintenance Menus
10-33
10-6 Maintenance Notice
The Maintenance Notice reminds you to do necessary maintenance at fixed time intervals. The
parts which need lubrication, cleaning, etc., are notified by the Maintenance Notice window.
If your mounter has a UPS (uninterruptable power system) option, the replacement time of the
battery is also notified.
Setting
Menu: Manual>Maintenance>Maintenance Notice
Action:
① You can select when the maintenance notice is given. Select in order of Tool and
Maintenance notice. Check the [When the machine boots up] and/or the [Before starting
production] box. The both timings can be selected at the same time.
② Optimal maintenance period of each part is registered in the mounter in two ways of
timings, by time as the [Noticed Period Countdown] and by days as the [Date].
To reset maintenance periods to the optimal intervals, check the parts you want to reset
and click the <Reset> button. Then the [Noticed Period Countdown] and the [Date] of
checked parts are reset to the registered optimal intervals.
Pointing an item spears a popup hint that
explains how the part to be maintained.
Chapter 10 Replenishing Components and Using Maintenance Menus
10-34
Notification
Action:
① When maintenance period has been passed; the [Noticed Period Countdown] becomes ‘0’
or the [Date] has come (whichever comes first), the parts which need to be maintained
appear in the Maintenance Notice window.
② Do maintenance of the displayed parts.
Note: For maintenance details, refer to 3. Mechanical Section in the maintenance manual.
③ If you want do the maintenance later, click the <Ignore the maintenance notice now>
button. The confirmation message appears.
④ Click the <OK> button.
The postponed maintenance notice appears again when the mounter is turned on or when
restarting the production after eight hours has passed.
Note: When you postpone the maintenance, be sure to do it later.