M20_Ope_E - 第380页
Chapter 12 Management Data 12-4 ■ Total Time (Per Job) Actual Run Time: Run Time – Total Stop Time Pause Time: Pause time pressed by the CYCLE STOP switch (cycle stop) Fiducial Process Time: XY tr avel to mark ～ Recognit…
Chapter 12 Management Data
12-3
■Whole (Per Job)
* Items in this window vary according to machine models and types.
Run Time: Job End Time – Job Start Time (Total time in run mode)
Job Start Time
Job End Time
Actual Run Time: Rum time – Total Stop Time
Total Stop Time: Error Stop Time – Pause in Component Lack Time +
Pause Time + PCB Transfer Wait (for PCB arrival)
Error Stop Count
Pause in Component
Lack Count
Pause Count
Chapter 12 Management Data
12-4
■Total Time (Per Job)
Actual Run Time: Run Time – Total Stop Time
Pause Time: Pause time pressed by the CYCLE STOP switch
(cycle stop)
Fiducial Process Time: XY travel to mark ～ Recognition completion
Bad Mark Process Time: XY travel to mark ～ Recognition completion
MX Feeder Pallet Exchange Time: Operating time of shuttle, elevator etc.
MX Feeder Tray Replenish Time: Travel to pickup-point completion ～ Tray feed
completion (head wait time)
PCB Transfer Wait (for Pre-process): Pre-process ready ON ～ Entrance sensor ON
PCB Transfer Wait (for PCB arrival): Travel to head wait-point completion ～ PCB clamp
completion
PCB Transfer Wait (for Post-process): Production of one PCB completion (arrival at exit
buffer) ～ unloading start
PCB Transfer Wait (for PCB exit): PCB unclamp ～ Loading completed
Retry Time: Reject start ～ Re-pickup ～ Vision recognition OK
Pause in Component Lack (Feeder): Pause time due to component exhaustion
(remain count = 0)
Pause in Retry Count Limit (Feeder): Pause time due to retry over due to
pickup/vision-process error
Pause in Component Lack (Tray): Pause time due to component exhaustion
(remain count = 0)
Pause in Retry Count Limit (Tray): Pause time due to retry over due to
pickup/vision-process error
ANC Exchange Time: XY travel to ANC ～ Removal completion (Z up)
Feeder Replenish Time: Travel to pickup point completion ～ Feeder feeding
completion (head wait time)
Error Stop Time: Pause time due to errors (excluding emergency stop)
QR Code Recognition Time: PCB QR code recognition time (option)
Switching Program Time: Production-program auto-switching time with QR
code, etc. (option)
Mark Post Process Time: Recognition time for XY mark compensation.
Nozzle Scan Time: Nozzle ID recognition time
Nozzle Arrangement Time: Nozzle arrangement time for nozzle optimization
Chapter 12 Management Data
12-5
■Performance (Per Job);
Produced PCB Count, Pause Count, Fiducial Process Count, Fiducial Mis-recognition Count,
Fiducial Coordinates Adjust Count, Bad Mark Process Count, Bad Mark Mis-Recognition
Count, Bad Mark Process Skip Count, Bad Mark Process Un-skip Count, Pickup Count, Place
Count, Pickup Error Count, Vision Process Error Count, Coplanarity Error Count, Interrupt
Count, Reject Count, Reuse Count, Choke Count, ANC Exchange Count (off), ANC Exchange
Count (on), Pickup Error Count in Comp Exhaustion, Feeder Link Count, PCB Skip Count,
Switching Program Count , QR Code Process Count, QR Code Mis-recognition Count, Nozzle
Scan Count, Nozzle Arrangement Count, 2 Points Fiducial Count, 2 Points Fiducial Count
(Elastic), Pickup Error/Pickup Count (%), Vision Error/Pickup Count (%), Feeder Drive Error