M20_Ope_E - 第438页

204 Provisional positioning failed. %m Head%c1 Check component data/thickness/condition, illumination, and camera. 205 Provisional positioning failed. %m Head%c1 Check component data/thickness/condition, illumination, an…

150 Wrong multiple view assignment %m Head%c1 Check image data or contact us.

151 Positioning fails. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

152 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

153 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

155

Result of lead-ends-distance detection for connector

exceeds allowable range. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

156

Lead pitch of measured component exceeds allowable

value. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

157

Lead pitch of measured component exceeds allowable

value. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

158 Gain and offset is not properly set. %m Head%c1

As the result of measurement, less number of leads

are found.

159 Lead count is less than set value. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

160 Lead count is less than set value. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

161 Component corner detection fails. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

162 BGA ball detection fails. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

163 Ball size exceed allowable range. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

164 Ball shape is not proper. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

165 Cannot handle the component. Contact us.

166 Inapplicable illumination is assigned. Contact us.

167 Pre-angle-designation fails.

Pre-rotation function is not available for the mount

angle.

168 Internal Error 168 Both sizes do not match in image copy. Contact us.

170 Designation of brightness measurement is wrong. Contact us.

172 Downloading of model data fails. Contact us.

173 Wrong setting for communication. Contact us.

174 Internal Error 174

Invalid communication command is received. Contact

us.

175 Communication fails. There is no valid packet. Contact us.

176 Communication fails. Timeout occurs during packet receiving. Contact us.

177 Communication fails.

Check-sum error occurred in received packet.

178 Received packet size error

179 Downloading of model data fails. Recapture model or contact us.

180 Downloading of model data fails. Recapture model or contact us.

181 Display mode designation error Window switching mode is wrong. Contact us.

182 Image recognition by camera fails. %m Head%c1 Continuous image capture is out of spec. Contact us.

183

Continuous component recognition by camera fails.

%m Head%c1

Check for valid head designation. Contact us.

184 Multiple-view process fails. %m Head%c1

Image acquisition fails or wrong assignment of result

display of multiple-view process. Contact us.

185 Image capture error

186 Chucking process failed. %m Head%c1 No vision target is found in chucking process.

187 Failed in positioning transistor. %m Head%c1

Disturbing image is shot in provisional positioning

area. Or no vision target is found.

188

Failed in positioning process for CPL process. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

189 Failed to detect a circle. Candidate circle edges are not enough.

190 Reverse and Direction Check Error. Check image data/component condition

191 Failed in Bright Decision.

192 Edge search window exceeds limit.

200 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

201 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

202 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

203 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

204 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

205 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

206 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

207 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

208 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

209 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

210 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

211 Provisional positioning failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

212 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

213 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

214 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

215 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

216 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

217 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

218 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

219 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

220 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

221 Lead detection failed. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

230 Position of balls is not processible. %m Head%c1 Check component data.

231

Provisional positioning of whole balls failed. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

232

Failed in ball detection for provisional angle. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

233 Provisional angle is abnormal. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

234

Failed in whole balls chucking process for provisional

positioning. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

235 Whole ball size is abnormal. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

236

Failed in detection of balls for component center

angle calculation. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

237

Detected number of balls was short for component

center angle calculation. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

238 Component angle is abnormal. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

239

Failed in ball detection in whole balls check. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

240

Ball size is abnormal in whole balls check. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

241

Ball form is abnormal in whole balls check. %m

Head%c1

Check component data/thickness/condition,

illumination, and camera.

242 Failed in ball detection labeling. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

243

Lost candidate ball in size/area check after labeling.

%m Head%c1

Check component data/thickness/condition,

illumination, and camera.

244

Number of candidate balls in allowable range of

X/Y/diagonal pitch exceeds the limit. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

245

Number of main side vector valid balls is abnormal.

%m Head%c1

Check component data/thickness/condition,

illumination, and camera.

246

Failed in perimeter ball center detect blob process for

component center calculation. %m Head%c1

Check component data/thickness/condition,

illumination, and camera.

picked-up components are overlapped.

247

248

The number of the ball exceeded 64.

Coordinates of component center is wrong.

Check component data/thickness/condition,

300 Provisional positioning failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

301 Provisional positioning failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

302 Provisional positioning failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

303 Provisional positioning failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

304 Lead detection failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

305 Lead detection failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

306 Lead detection failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

308

Result of lead pitch detection exceeds allowable limit.

illumination, and camera.

Check component data/thickness/condition,

309

%m Head%c1

Lead detection failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

310

Detected component size exceeds allowable limit. %m

illumination, and camera.

Check component data/thickness/condition,

311

Head%c1

Unavoidable error occurred in calculating correction

illumination, and camera.

Check component data/thickness/condition,

value. %m Head%c1 illumination, and camera.

312

314

Result display of vision test fails.

Lead center detection range is abnormal. %m

Check component data/thickness/condition,

Head%c1 illumination, and camera.

315

400

Lead count setting is abnormal. %m Head%c1

Provisional positioning failed. %m Head%c1

Check component data.

Check component data/thickness/condition,

401 Provisional positioning failed. %m Head%c1

illumination, and camera.

Check component data/thickness/condition,

illumination, and camera.

503 Nozzle ID detection failed. ANC(%d1) Check NOS data.

504 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.

505 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.

506 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.

507

508

Nozzle ID detection failed. ANC(%d1)

Nozzle ID error or index mark was not detected.

Check NOS data, station, and illumination.

ANC(%d1)

509 Index mark size is abnormal. ANC(%d1) Check NOS data, station, and illumination.

510 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.

511 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.

600 Angle of head mark (temporary) was not detected. Check NOH data.

601 Head recognition mark was not detected. Check NOH data.

602 Search area exceeded predetermined range. Check NOH data.

603

700

Failed to detect the manipulator. Check image data of the manipulator.

An obstacle are found at the nozzle tip by Comp

800

remain check. Head%c1

Dispense Check Process Error

The status of dot/line cannot be detected correctly

801

Dot size error. Criteria (Expected Size:%v1mm, Size

Perm:%d2%), Result(Point:%d3, Long Side:%v4mm,

in the dispense check

Dot size exceeds the allowable range in the dispense

check.

802

Short Side:%v5mm)

Dot area error. Criteria (Expected Size:%v1mm,

Expected Area:%v6mm2 Area Perm:%d2%),

Dot area exceeds the allowable range in the dispense

check.

803

Result(Point:%d3, Area:%v4mm2)

Line width error. Criteria (Expected Width:%v1mm,

Width Perm:%d2%), Result(Average Width:%v3mm,

Line width exceeds the allowable range in the

dispense check.

Width Ratio:%d4%)

804 Line dispensing edge error

805

806

Line dispensing center error

Line width error. Result( Average Width:%v3mm, Width Line width exceeds the allowable range in the

Ratio:%d4% ) dispense check.

808

840

Dots count error More than 2 dots are detected.

The image processing area of the component exceeds

841

the camera's field of view.

The image processing areas of the neighboring