M20_Ope_E - 第439页

picked-up components are overlapped. 247 248 The number of the ball exceeded 64. Coordinates of component center is wrong. Check component data/thickness/condition, 300 Provisional positioning failed. %m Head%c1 illumina…

100%1 / 518
204 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
205 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
206 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
207 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
208 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
209 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
210 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
211 Provisional positioning failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
212 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
213 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
214 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
215 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
216 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
217 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
218 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
219 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
220 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
221 Lead detection failed. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
230 Position of balls is not processible. %m Head%c1 Check component data.
231
Provisional positioning of whole balls failed. %m
Head%c1
Check component data/thickness/condition,
illumination, and camera.
232
Failed in ball detection for provisional angle. %m
Head%c1
Check component data/thickness/condition,
illumination, and camera.
233 Provisional angle is abnormal. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
234
Failed in whole balls chucking process for provisional
positioning. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
235 Whole ball size is abnormal. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
236
Failed in detection of balls for component center
angle calculation. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
237
Detected number of balls was short for component
center angle calculation. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
238 Component angle is abnormal. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
239
Failed in ball detection in whole balls check. %m
Head%c1
Check component data/thickness/condition,
illumination, and camera.
240
Ball size is abnormal in whole balls check. %m
Head%c1
Check component data/thickness/condition,
illumination, and camera.
241
Ball form is abnormal in whole balls check. %m
Head%c1
Check component data/thickness/condition,
illumination, and camera.
242 Failed in ball detection labeling. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
243
Lost candidate ball in size/area check after labeling.
%m Head%c1
Check component data/thickness/condition,
illumination, and camera.
244
Number of candidate balls in allowable range of
X/Y/diagonal pitch exceeds the limit. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
245
Number of main side vector valid balls is abnormal.
%m Head%c1
Check component data/thickness/condition,
illumination, and camera.
246
Failed in perimeter ball center detect blob process for
component center calculation. %m Head%c1
Check component data/thickness/condition,
illumination, and camera.
picked-up components are overlapped.
247
248
The number of the ball exceeded 64.
Coordinates of component center is wrong.
Check component data/thickness/condition,
300 Provisional positioning failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
301 Provisional positioning failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
302 Provisional positioning failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
303 Provisional positioning failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
304 Lead detection failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
305 Lead detection failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
306 Lead detection failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
308
Result of lead pitch detection exceeds allowable limit.
illumination, and camera.
Check component data/thickness/condition,
309
%m Head%c1
Lead detection failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
310
Detected component size exceeds allowable limit. %m
illumination, and camera.
Check component data/thickness/condition,
311
Head%c1
Unavoidable error occurred in calculating correction
illumination, and camera.
Check component data/thickness/condition,
value. %m Head%c1 illumination, and camera.
312
314
Result display of vision test fails.
Lead center detection range is abnormal. %m
Contact us.
Check component data/thickness/condition,
Head%c1 illumination, and camera.
315
400
Lead count setting is abnormal. %m Head%c1
Provisional positioning failed. %m Head%c1
Check component data.
Check component data/thickness/condition,
401 Provisional positioning failed. %m Head%c1
illumination, and camera.
Check component data/thickness/condition,
illumination, and camera.
503 Nozzle ID detection failed. ANC(%d1) Check NOS data.
504 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.
505 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.
506 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.
507
508
Nozzle ID detection failed. ANC(%d1)
Nozzle ID error or index mark was not detected.
Check NOS data, station, and illumination.
Check NOS data, station, and illumination.
ANC(%d1)
509 Index mark size is abnormal. ANC(%d1) Check NOS data, station, and illumination.
510 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.
511 Nozzle ID detection failed. ANC(%d1) Check NOS data, station, and illumination.
600 Angle of head mark (temporary) was not detected. Check NOH data.
601 Head recognition mark was not detected. Check NOH data.
602 Search area exceeded predetermined range. Check NOH data.
603
700
Failed to detect the manipulator. Check image data of the manipulator.
An obstacle are found at the nozzle tip by Comp
800
remain check. Head%c1
Dispense Check Process Error
The status of dot/line cannot be detected correctly
801
Dot size error. Criteria (Expected Size:%v1mm, Size
Perm:%d2%), Result(Point:%d3, Long Side:%v4mm,
in the dispense check
Dot size exceeds the allowable range in the dispense
check.
802
Short Side:%v5mm)
Dot area error. Criteria (Expected Size:%v1mm,
Expected Area:%v6mm2 Area Perm:%d2%),
Dot area exceeds the allowable range in the dispense
check.
803
Result(Point:%d3, Area:%v4mm2)
Line width error. Criteria (Expected Width:%v1mm,
Width Perm:%d2%), Result(Average Width:%v3mm,
Line width exceeds the allowable range in the
dispense check.
Width Ratio:%d4%)
804 Line dispensing edge error
805
806
Line dispensing center error
Line width error. Result( Average Width:%v3mm, Width Line width exceeds the allowable range in the
Ratio:%d4% ) dispense check.
808
840
Dots count error More than 2 dots are detected.
The image processing area of the component exceeds
841
the camera's field of view.
The image processing areas of the neighboring
911 Origin of %s is not taken. Check Tray Feeder.
850 Debris is detected. The placement is cancelled.
Debris is detected by Debris check. The placement is
851 Failed to output the image data.
cancelled.
Debris is detected by Debris check. Failed to output
the Image data file. The memory device may be full.
852 Image data file is not found. Image data file is not fount by Debris check.
853
854
Failed to read Image data file.
Internal process error: Failed to start Event reception.
Failed to read Image data file by Debris check.
Debris check: Internal process error: Failed to start
855
Internal process error: Event-reception-timeout error
occurred.
Event reception process RtOpenEvent().
Debris check: Internal process error: Failed to
response within set Event-reception-timout from
856
Internal process error: WinVision image-process-
WinVision image processing.
Debris check: Internal process error: WinVision image
857
program is aborted.
Internal process error: Failed to wait Event from
processing is aborted.
Debris check: Internal process error: Failed to receive
858
WinVision image processing.
Internal process error: Failed in HALCON function.
Response event from Vision image processing.
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
859 Internal process error: Failed in HALCON function.
processing. read_image()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
860 Internal process error: Failed in HALCON function.
processing. gauss_image()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
861 Internal process error: Failed in HALCON function.
processing. check_difference()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
862 Internal process error: Failed in HALCON function.
processing. closing_circle()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
863 Internal process error: Failed in HALCON function.
processing. opening_circle()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
864 Internal process error: Failed in HALCON function.
processing. connection()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
865 Internal process error: Failed in HALCON function.
processing. select_shape()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
866 Internal process error: Failed in HALCON function.
processing. count_obj()
Debris check: Internal process error: Failed to
execute HALCON function in WinVision image
867
Internal process error: Failed to get Shared image
address.
processing. sort_region()
Debris check: Internal process error: Failed to get
Shared image address in WinVision image processing.
868
Internal process error: Failed to get Shared image
data address.
(D_GetImageData)
Debris check: Internal process error: Failed to get
Shared image data in WinVision image processing.
869 Internal process error: Failed to unlink Image data file.
(D_GetImageData)
Debris check: Internal process error: Failed to unlink
900
Image data file in WinVision image processing. (unlink)
The board arrival sensor is ON at the timing to drive
901
PCB stopper.
The entrance sensor is ON at the timing to convey
902
out PCB.
Board jams between exit of pre-process and entrance
Check conveyor belts and conveyor motors.
903
sensor.
Board jams between exit sensor and entrance of
Check conveyor belts and conveyor motors.
post-process.
904 Board jams on %s. Check conveyor belts and conveyor motors.
905 Inspection NG PCB is on the conveyor. Remove the PCB from the conveyor.
906 Entrance Shutter error. Actuate Entrance Shutter in manual menu.
907
908
Exit Shutter error.
The head%d1 locates too low to exchange the pallet
Actuate Exit Shutter in manual menu.
Check head height.
909
of the %s.
Tray data of %s - Component height exceeds the
Check Component Height.
910
allowable limit.
Choke pressure error at nozzle exchange on Head%c1 Check for nozzle choke or component remaining on
with Nozzle No.%d2. %d3 > %d4. nozzle.