M20_Ope_E - 第449页

1338 %s CFB is not set. CFB's set sensor is not responding. Set CFB in position. 1293 MX-20 Elevator Slow-down Stop (Pallet-%d1) Check conditions of MX-20. 1294 Manual opening of ANC is detected. Unconformity in noz…

1291 MX-20 Cover Open (Pallet-%d1) 0

1292 MX-20 Pallet Interlock in Stocker (Pallet-%d1) Check conditions of MX-20.

1249 Clearing of message buffer.

Message buffer is cleared because message was

paused for prescribed time.

1250

1251

MX-20 Pallet Exists on Shuttle (Pallet-%d1)

MX-20 No Pallet on Shuttle (Pallet-%d1)

Check MX-20 setting.

1252

MX-20 Pallet Exists on Shuttle whereas Pallet Not

Programmed (Pallet-%d1)

Check MX-20 setting.

1253

MX-20 No Pallet on Shuttle whereas Pallet

Check MX-20 setting.

Programmed (Pallet-%d1)

1254

1255

MX-20 Pallet Exists in Stocker (Pallet-%d1)

MX-20 No Pallet in Stocker (Pallet-%d1)

Check MX-20 setting.

1256

MX-20 Pallet Exists in Stocker whereas Pallet Not

Programmed (Pallet-%d1)

Check MX-20 setting.

1257

MX-20 No Pallet in Stocker whereas Pallet

Check MX-20 setting.

1258

Programmed (Pallet-%d1)

MX-20 Pallet No. Failure in Stocker (Pallet-%d1) Check MX-20 setting.

1259

MX-20 Timeout in Locking Pallet Stopper in Stocker

(Pallet-%d1)

Check conditions of MX-20.

1260

MX-20 Timeout in Unlocking Pallet Stopper in

Check conditions of MX-20.

Stocker (Pallet-%d1)

1261 MX-20 Timeout in Relay Hook Up (Pallet-%d1) Check conditions of MX-20.

1262 MX-20 Timeout in Relay Hook Down (Pallet-%d1) Check conditions of MX-20.

1263 MX-20 Timeout in Shuttle Clamp (Pallet-%d1) Check conditions of MX-20.

1264 MX-20 Timeout in Shuttle Unclamp (Pallet-%d1) Check conditions of MX-20.

1265 MX-20 Timeout in Elevator Movement (Pallet-%d1) Check conditions of MX-20.

1266

1267

MX-20 Timeout in Shuttle Movement (Pallet-%d1)

MX-20 Timeout in Relay Hook Movement (Pallet-

Check conditions of MX-20.

1268

MX-20 Timeout for Elevator Returning to Origin

(Pallet-%d1)

Check conditions of MX-20.

1269

MX-20 Timeout for Shuttle Returning to Origin

(Pallet-%d1)

Check conditions of MX-20.

1270

MX-20 Timeout for Relay Hook Returning to Origin

Check conditions of MX-20.

(Pallet-%d1)

1271 MX-20 Stocker Interlock (Pallet-%d1) Check conditions of MX-20.

1272

1273

MX-20 Relay Hook Origin Sensor On (Pallet-%d1)

MX-20 Relay Hook Origin Sensor Off (Pallet-%d1)

Check conditions of MX-20.

1274

MX-20 Relay Hook Advance End Sensor On (Pallet-

%d1)

Check conditions of MX-20.

1275

MX-20 Relay Hook Advance End Sensor Off (Pallet-

Check conditions of MX-20.

%d1)

1276

1277

MX-20 Relay Hook Down Sensor On (Pallet-%d1)

MX-20 Relay Hook Down Sensor Off (Pallet-%d1)

Check conditions of MX-20.

1278

MX-20 Pallet Clamp Off Sensor on Shuttle On

(Pallet-%d1)

Check conditions of MX-20.

1279

MX-20 Pallet Clamp Off Sensor on Shuttle Off

(Pallet-%d1)

Check conditions of MX-20.

1280

MX-20 Pallet Stopper Off Sensor in Stocker On

(Pallet-%d1)

Check conditions of MX-20.

1281

MX-20 Pallet Stopper Off Sensor in Stocker Off

(Pallet-%d1)

Check conditions of MX-20.

1282

MX-20 Failed in Assigning Elevator Moving Position

(Pallet-%d1)

Check conditions of MX-20.

1283

MX-20 Failed in Assigning Relay Hook Moving

Position (Pallet-%d1)

Check conditions of MX-20.

1284

MX-20 Failed in Assigning Shuttle Moving Position

(Pallet-%d1)

Check conditions of MX-20.

1285

MX-20 Shuttle/Conveyor-width Position Error

(Pallet-%d1)

Check conditions of MX-20.

1286

MX-20 Front Shuttle Position Sensor Not Respond

after Shuttle Movement (Pallet-%d1)

Check conditions of MX-20.

1287

MX-20 Rear Shuttle Position Sensor Not Respond

after Shuttle Movement (Pallet-%d1)

Check conditions of MX-20.

1288

MX-20 Shuttle Origin Sensor Not Respond after

Shuttle Movement (Pallet-%d1)

Check conditions of MX-20.

1289

MX-20 Relay Hook Origin Sensor Not Responds after

Relay Hook Movement (Pallet-%d1)

Check conditions of MX-20.

1290

MX-20 Relay Hook Advance End Sensor Not Respond

Check conditions of MX-20.

after Relay Hook Movement (Pallet-%d1)

1338 %s CFB is not set.

CFB's set sensor is not responding. Set CFB in

position.

1293 MX-20 Elevator Slow-down Stop (Pallet-%d1) Check conditions of MX-20.

1294

Manual opening of ANC is detected. Unconformity in

nozzle info. may occur. Job run cannot be continued.

Perform nozzle scanning.

1295

Cannot continue operation. Machine origin

unidentified.

Select <Edit&Teach> button, and perform Origin

Initialize again.

%s Returning to Origin. Origin Sensor Z-phase

1296

1297

Distance Error(Z:%d1 - O:%d2 = %d3 > %d4)

%s operation error (Pallet-%d2)

Check the origin sensor and Z-phase input.

Check pallet information or MXR.

Paper shortage of DotStation or DotStation position Refill paper of DotStation. Or check pickup station

1298

error occurred. No. of DotStation.

1299 Dot station motor alarm. Check for cleaning paper jam or motor problem.

1300 Standard device %c4%c1%s initialization error (%e) Error at control board/driver. Contact us.

1301

1302

Program error. Failed to initialize the task.

Program error

System error. Contact us.

1303

Drive signal is not turned On. (The cover may not be

closed properly.)

System error. Contact us.

Motor alarm at the initialization of %c4%c2%s. (alarm Turn off servomotors via Maintenance>ServoOff. Ten

1304

1305

code %d1)

Option device %c4%c1%s is not initialized properly. (%e)

minutes later, turn them on.

Error at control board/driver. Contact us.

Check the setting of IC card and communication

1306 Vision system initialization error

cable. Restart the system.

1307 Air pressure at initialization is abnormal. Check the air piping and restart the system.

1308 Command sequence error Contact us.

1309 Paused for postponed retry steps. Press <Recovery> switch and then <Start> switch.

1310 Improper component feeding %s #%d1 Head%c2 Stop operation and check feeding conditions.

1311 No available feeder %s #%d1 Head%c2 Stop operation and check for presence of feeder.

1312

1313

Feeder error Head%c1

Improper component feeding %s #%d1

Out of component or no component at pickup point.

Stop running and check the feeding conditions.

1314 Job run is paused.

Set up the mounter and resume job run by pressing

<Recovery> and <Start>.

1315

Component is detected on the nozzle in comp.

Remain Check.

Check the pickup/placement and take proper

measures in the Edit & Teach mode.

%m PCB code mismatch was detected. Auto program

1316

1317

change was performed.

%m PCB code mismatch was detected.

Auto program change was performed.

PCB code mismatch was detected.

Nozzles on heads and Nozzle Information do not If the machine does not recognize nozzle IDs properly,

1318

1319

match.

No program step to execute.

Check the program setting (skip assignment, etc.).

1320

Reached the limit of vision-process retry count (%m

%s-%d3 Head%c1 Nozzle No.%d2 Step:%d5

Check the image library data and illumination setting.

1321

Reached the limit of pickup retry count (%m %s-%d3

Head%c1 Nozzle No.%d2 Step:%d5 Offset:%d6)

Check the pickup coordinates and nozzle choice.

1322

Reached the limit of feeder retry count (%m %s-%d3

Head%c1 Nozzle No.%d2 Step:%d5 Offset:%d6)

Check the component feeding conditions.

1323

Out of component (%m %s-%d3 Head%c1 Nozzle

No.%d2 Step:%d5 Offset:%d6)

After replenishing components, update the component

count setting.

1324

Reached the limit of choke-pressure retry count

(Head%c1 Nozzle No.%d2 Step:%d5 Offset:%d6)

Check the air pressure, air filter, and nozzle data.

Check that the component feeder is mounted. Check

1325

Usable feeder is not mounted. Head%c1, Nozzle

No.%d2, Step:%d5, Offset:%d6

that the feeder is mounted on the head reachable

station.

Reached the limit of coplanarity retry count (%m %s- Check the component's image code and coplanarity

1326

1327

%d3 Head%c1 Nozzle No.%d2 Step:%d5 Offset:%d6)

Timeout in coplanarity check

data.

Check the wiring of the LIM unit.

Check the power to the LIM unit. Check the wiring of

1328 Power to the LIM unit is off.

the LIM unit.

1329 LIM unit is in the local mode. Switch the LIM unit's mode to the host mode.

1330

1331

Out of component. %s #%d1

Out of component. %s #%d1 (P%d2#-%d3 pallet)

Replenish components.

1332 Components are running out. %s #%d1 rest %d2 pcs.

Components are used down to

Program>PickupData>ShortageAlarm setting.

Components are running out. %s #%d1 (P%d2#-%d3 Components are used down to

1333

pallet) rest %d4 pcs. Program>PickupData>ShortageAlarm setting.

1334 Failed to lock CFB %s. Check CFB lock mechanism.

1335 Failed to unlock CFB %s. Check CFB lock mechanism.

1336

1337

Setup ready error

Setup complete error

Check CFB lock mechanism.

1384 ANC operation error

Check ANC shutter and missetting of nozzle. Contact

us for ANC scanning error.

1339 Communication error in image process

1340

1341

Component lack. Setup is possible %s #%d1

Pickup points of component lack are displayed.

Replenish components.

Vision process sequence error. Execute system

1342

recovery.

Check Vision processing unit or Cables for error.

1343 Failed to clamp MX-ST2. Failed to clamp MX-ST2.

1344 Failed to unclamp MX-ST2. Failed to unclamp MX-ST2.

1345 %s pallet setting error (Pallet-%d2) Check pallet information or MXR.

1346

1347

%s origin acquisition error (Pallet-%d2)

Cannot supply components from %s.

Check conditions of MXR.

Check the feeder.

The feeder is specified as unavailable feeder. %s Clear the Feeder Skip state for concerned pickup

1348

1349

#%d1

AMF measurement ends.

point(s).

1350 Setup error

This error is caused by effect of other errors. Check

the other error messages near around.

1351

Retry step postpone table is full. Execute normal

retry process.

Retry step postpone table is full. Execute normal

retry process.

MAP measurement ends. Press Start SW to convey

1352 MAP measurement ends.

out the board.

1353

1354

Axis movements are unstable.

There are no usable pickup points because the

1355 machine is in the changeover state. (%m %s-%d3

Head%c1 Nozzle No.%d2 Step:%d5 Offset:%d6)

End the changeover state.

1356 Reject conveyor on %s %d1 is almost out of space.

There are no usable pickup points because Feeder

Components on Reject conveyor are almost full.

(Warning!)

1357 Skip is/are specified. (%m %s-%d3 Head%c1 Nozzle

Clear the Feeder Skip state for concerned pickup

1358

No.%d2 Step:%d5 Offset:%d6)

Controller error

point(s).

System is not operating properly. Contact us.

Check the code entry equipment for settings and

1359 PCB code entry error connections. To continue the job run, check the PCB

code and select the program.

1360 %s Motor alarm

Execute Maintenance>ServoOff. Ten minutes later,

turn on <Servo> switch.

Coordinates exceeded the setting of

1361 %s position exceeded the limit. SystemParameter>WorkRange or

SystemParameter>Axis>TravelDist.

1362 %s detected EL(+). Overrun. Take origin again.

1363 %s detected EL(-). Overrun. Take origin again.

1364 Origin of %s is not taken. Check Origin menu.

1365

1366

%s error

Error occurs at %s.

Remove error.

1367 %m PCB code is not defined in the Plan.

Define the PCB code in the Plan and select the

program.

Fiducial correction was not performed. Change the

1368 Fiducial error (4point)

mark location.

1369

1370

Timeout in %s operation.

ANC slide channel operates improperly.

Check cylinders, motors, and sensors.

Check cylinders and sensors.

This nozzle station is not for removing nozzles from

1371 The nozzle cannot be removed from the head.

heads.

1372 Error occurs in image processing. Check image process system and communication

1373 Device cannot be initialized. Contact us.

1374

1375

Error in opening PS-BC shutter. %s (%d1)

Error in closing PS-BC shutter. %s (%d1)

Check the shutter mechanism of the bulk feeder.

1376 Main clamp is abnormal.

Check support pin for crash. Check adjust plate for

foreign matters.

Check PCB stopper for normal operation st Manual

1377 PCB stopper is abnormal.

menu.

1378 Rear clamp is abnormal. Check rear clamp for normal operation.

1379

1380

Side clamp is abnormal.

ANC shutter is abnormal.

Check side clamp.

Check ANC shutter.

Computing error for correction. Save Log file and

1381 Fiducial error (calculation)

1382

1383

Conveyor error

Disconnect the cable and air tube for the CFB.

Check conveyor transfer belts and motors.